Description
Description:
This is a Waveshare 2-inch LCD Display Module. A general LCD Module with an IPS screen, 2-inch diagonal, 240×320 resolution, embedded controller, communicating via SPI interface. 2-inch LCDÂ Module supports Raspberry Pi, Arduino, STM32, etc.

Specifications:
| Operating Voltage | 3.3V / 5V |
| Resolution | 240 × 320 pixels |
| Communication Interface | 4-wire SPI |
| Display Size | 30.60 × 40.80mm |
| Display Panel | IPS |
| Pixel Size | 0.0975 × 0.0975mm |
| Driver | ST7789VW |
| Module Size | 58.0 × 35.0mm |
Features:
- 240×320 resolution, 262K colors, clear and colorful displaying effect
- SPI interface minimizes required IO pins
- Comes with online development resources (examples for Raspberry Pi/VisionFive2/Arduino/STM32)
Pin Description:

| VCC | Power (3.3V / 5V input) |
|---|---|
| GND | Ground |
| DIN | SPI data input |
| CLK | SPI clock input |
| CS | Chip selection, low active |
| DC | Data/Command selection (high for data, low for command) |
| RST | Reset, low active |
| BL | Backlight |
Useful Link:
Waveshare 2 Inch LCD Display Module
Package Included:
- 1 x 2inch LCD Module
- 1 x PH2.0 20cm 8Pin








Waveshare 4.3inch Capacitive Touch LCD 800x480 Pixels Resolution IPS Panel 216 Colors Via 24-Bit RGB Interface For Pi
N20 Micro Motor 6V 300 RPM Micro Motor Micro Metal Gear Motor High-Torque Micro Motor Low-Noise Micro Motor High-Efficiency Micro Motor For RC Models
Radiolink Mini PIX Flight Controller Mini Pixhawk Controller Mini Pix APM Flight Controller V1.2 FC for 3-6 Axis FPV Drone/Helicopter/Aircraft/Quad/Car/Boat
GT2 Timing Belt 10M GT2 Width 6mm Black Open Timing Belt For 3D Printer
Creality Ender 3 V3 3D Printer
5V 1A 7805 Voltage Regulator
CX-10D Mini Drone Newest Cheerson CX-10D RC Mini Nano Drone 2.4G 6-axis High Hold Mode LED RC Quadcopter RTF with Transmitter
2Wd Transparent Smart Motor Robot Car Battery Box Chassis Kit For Arduino
Radiolink SUI04 Ultrasonic Sensor Range Finder Obstacle Avoidance for Racing Drone, Robots, Quadcopter, Multi-Copter
4S 12A BMS Board 14.8v Li-Ion Battery Protection Board 18650 Li-ion Lithium Battery Protection and Charger BMS Module
Fluo Popsicle Yellow PLA PRO+
Waveshare 4 inch LCD 10.16cm RPi LCD (A) 480x320 Raspberry Pi Display
Radiolink CM210 LiPo Battery Balance Charger CM210 20W 1.5A Faster 2S 7.4V LiPo Battery Balance Charger USB Type-C Connector for RC Airplane Transmitter Car Boat SCX24 SCX10 Gel Blaster Gun
37 in 1 Sensor Kit Compatible with Arduino UNO, NodeMcu, Raspberry Pi, Robotics Projects
65-Pieces T-Tap Wire Connector Kit Insulated Wire Connector 22-18, 18-14, 12-10 AWG Assortment Kit For Fast & Reliable Wiring
Reviews
There are no reviews yet.