Description
Description:
This is a Waveshare 2-inch LCD Display Module. A general LCD Module with an IPS screen, 2-inch diagonal, 240×320 resolution, embedded controller, communicating via SPI interface. 2-inch LCDÂ Module supports Raspberry Pi, Arduino, STM32, etc.
Specifications:
| Operating Voltage | 3.3V / 5V |
| Resolution | 240 × 320 pixels |
| Communication Interface | 4-wire SPI |
| Display Size | 30.60 × 40.80mm |
| Display Panel | IPS |
| Pixel Size | 0.0975 × 0.0975mm |
| Driver | ST7789VW |
| Module Size | 58.0 × 35.0mm |
Features:
- 240×320 resolution, 262K colors, clear and colorful displaying effect
- SPI interface minimizes required IO pins
- Comes with online development resources (examples for Raspberry Pi/VisionFive2/Arduino/STM32)
Pin Description:
| VCC | Power (3.3V / 5V input) |
|---|---|
| GND | Ground |
| DIN | SPI data input |
| CLK | SPI clock input |
| CS | Chip selection, low active |
| DC | Data/Command selection (high for data, low for command) |
| RST | Reset, low active |
| BL | Backlight |
Useful Link:
Waveshare 2 Inch LCD Display Module
Package Included:
- 1 x 2inch LCD Module
- 1 x PH2.0 20cm 8Pin
Radiolink Divit Digital Video Transmission Adapter Board for DJI DIGITAL FPV SYSTEM, DJI O3 Air Unit, Caddx Walksnail Avatar HD System, compatible with Mini Pix, Crossflight, PIXHAWK 
TowerPro MG958 Servo Motor Digital High Torque Metal Gear Motor 
37 in 1 Sensor Kit Compatible with Arduino UNO, NodeMcu, Raspberry Pi, Robotics Projects 
5mm White Led Light Emitting Diode (Pack of 5) 
12V 200 RPM Geared Motor Johnson DC Gearbox Motor High-Torque 200 RPM Geared Motor High-Performance 100 RPM DC Geared Motor 
2x18650 Battery Holder 18650 x 2 Battery Holder with Cover and On/Off Switch With Open End Wires 
Push Button Cap 12x12x7.3 mm Round Cap For Square Tactile Switch - Black 
No Touch Stainless Steel Door Exit Switch/Touch Free Exit Push Release Button Switch for Electric Access Control 
Official Raspberry Pi Zero Case Compatible with Raspberry Pi Zero, Zero W, Zero 2W 
5MM Blue Led Light Emitting Diode (Pack of 5) 
Power Supply Regulator UBEC-5V/5A External Switching Power Supply Regulator 
5x6 18650 Battery Spacer Holder With 18.5mm Bore Battery Holder Lithium-ion Battery Holder Rechargeable Battery Holder Plastic Holder For DIY Battery Pack 
Nextion NX8048T050 5.0" HMI Touch Display 5-inch Basic Series Display Touchscreen Display for Arduino Raspberry Pi 
Seiko Protection IC 10A Protection Board Seiko Protection Board Seiko 3S 10A Lipo Battery Protection For 3S 11.1V 12V 12.6V 18650 Lipo Battery 
18650 Battery Shield 2 x 18650 Lithium Battery Shield V8 Mobile Power Expansion Board Module 5V/3A 3V/1A Micro USB for Arduino ESP32 ESP8266 
3-in-1 Copper Heat Sink for Raspberry Pi 3-in-1 Heat Sink Self-Adhesive Heat Sink CPU Cooler for Raspberry Pi 2/ Pi 3/ Pi 3B+/ Pi 4 
Push Button 12x12x7.3mm Tactile 4 Pin Push Button Switch 
Universal Heat Sink 25x25x10mm Universal Aluminum Heat Sink - Silver 
Candy Red PLA PRO+
Reviews
There are no reviews yet.