Description
Description:
This is a Waveshare 2-inch LCD Display Module. A general LCD Module with an IPS screen, 2-inch diagonal, 240×320 resolution, embedded controller, communicating via SPI interface. 2-inch LCDÂ Module supports Raspberry Pi, Arduino, STM32, etc.
Specifications:
| Operating Voltage | 3.3V / 5V |
| Resolution | 240 × 320 pixels |
| Communication Interface | 4-wire SPI |
| Display Size | 30.60 × 40.80mm |
| Display Panel | IPS |
| Pixel Size | 0.0975 × 0.0975mm |
| Driver | ST7789VW |
| Module Size | 58.0 × 35.0mm |
Features:
- 240×320 resolution, 262K colors, clear and colorful displaying effect
- SPI interface minimizes required IO pins
- Comes with online development resources (examples for Raspberry Pi/VisionFive2/Arduino/STM32)
Pin Description:
| VCC | Power (3.3V / 5V input) |
|---|---|
| GND | Ground |
| DIN | SPI data input |
| CLK | SPI clock input |
| CS | Chip selection, low active |
| DC | Data/Command selection (high for data, low for command) |
| RST | Reset, low active |
| BL | Backlight |
Useful Link:
Waveshare 2 Inch LCD Display Module
Package Included:
- 1 x 2inch LCD Module
- 1 x PH2.0 20cm 8Pin
Bambu Lab TPU 95A HF 1.75mm 3D Filament Black 
5400mAh Lipo Battery 14.8V 5400mAh 4S 30C Lithium Polymer Battery 
2Wd Transparent Smart Motor Robot Car Battery Box Chassis Kit For Arduino 
Bambu Lab TPU 95A HF 1.75mm 3D Filament Yellow 
ULN2003 Stepper Motor Driver ULN2003A Driver Module Stepper Motor Driver Board 
Waveshare 2inch LCD Display Module for Raspberry Pi Pico, 65K Colors, 320×240, SPI 
N20 Gear Motor N20 3V 35 RPM Micro Metal Gear Motor With Encoder N20 Motor 
SafeConnect XT60 Male Connector With 14AWG Silicon Wire 10cm XT60 Male Connector For Battery Charging High-Quality XT60 Male Connector For RC Applications
Reviews
There are no reviews yet.