Description
Description:
This is a Waveshare 2-inch LCD Display Module. A general LCD Module with an IPS screen, 2-inch diagonal, 240×320 resolution, embedded controller, communicating via SPI interface. 2-inch LCDÂ Module supports Raspberry Pi, Arduino, STM32, etc.

Specifications:
| Operating Voltage | 3.3V / 5V |
| Resolution | 240 × 320 pixels |
| Communication Interface | 4-wire SPI |
| Display Size | 30.60 × 40.80mm |
| Display Panel | IPS |
| Pixel Size | 0.0975 × 0.0975mm |
| Driver | ST7789VW |
| Module Size | 58.0 × 35.0mm |
Features:
- 240×320 resolution, 262K colors, clear and colorful displaying effect
- SPI interface minimizes required IO pins
- Comes with online development resources (examples for Raspberry Pi/VisionFive2/Arduino/STM32)
Pin Description:

| VCC | Power (3.3V / 5V input) |
|---|---|
| GND | Ground |
| DIN | SPI data input |
| CLK | SPI clock input |
| CS | Chip selection, low active |
| DC | Data/Command selection (high for data, low for command) |
| RST | Reset, low active |
| BL | Backlight |
Useful Link:
Waveshare 2 Inch LCD Display Module
Package Included:
- 1 x 2inch LCD Module
- 1 x PH2.0 20cm 8Pin








Bonka 2200mAh Lipo Battery 11.1V 35C Lithium Polymer Battery XT60 Connector 11.1V 3S Lipo Battery
White 8-Bit 5050 RGB LED Pipeline Lamp WS2811 RGB LED Module 105x10mm RGB LED Pipeline Lamp Module
Raspberry Pi 5 Single Board Computer with 2.4GHz quad-core, 64-bit Arm Cortex-A76, and LPDDR4X-4267 SDRAM 8GB
2 Pin Female JST Connector 2 Pin Battery Connector for JST RCY Plug Female Connectors Wire for RC Toys Battery
2x40 Pins Male Header 2x40 Pin 2.54mm Pitch Male Berg Strip-Right Angle
3PI miniQ Car wheel Tyre 42mm N20 DC Gear Motor Wheel
Raspberry Pi 3B+ Starter Kit: Your All-in-One DIY Computer Pi 3B+ Starter Pack Ideal For Coding, Programming And More
300 RPM Single Shaft BO rectangle Motor
15 RPM N20 Gear Motor 3V Micro Metal Gear Motor Mini Gear Motor N20 Micro Gear Motor N20 3V 15RPM Gear Motor
GL12 High Quality Nickel Plated 840 Points Bread Board or Solderless Pieces Circuit Test Board, White
Bambu Lab A1 Mini 3D Printer
Reviews
There are no reviews yet.