Description
Description:
This is a Waveshare 2-inch LCD Display Module. A general LCD Module with an IPS screen, 2-inch diagonal, 240×320 resolution, embedded controller, communicating via SPI interface. 2-inch LCDÂ Module supports Raspberry Pi, Arduino, STM32, etc.
Specifications:
| Operating Voltage | 3.3V / 5V |
| Resolution | 240 × 320 pixels |
| Communication Interface | 4-wire SPI |
| Display Size | 30.60 × 40.80mm |
| Display Panel | IPS |
| Pixel Size | 0.0975 × 0.0975mm |
| Driver | ST7789VW |
| Module Size | 58.0 × 35.0mm |
Features:
- 240×320 resolution, 262K colors, clear and colorful displaying effect
- SPI interface minimizes required IO pins
- Comes with online development resources (examples for Raspberry Pi/VisionFive2/Arduino/STM32)
Pin Description:
| VCC | Power (3.3V / 5V input) |
|---|---|
| GND | Ground |
| DIN | SPI data input |
| CLK | SPI clock input |
| CS | Chip selection, low active |
| DC | Data/Command selection (high for data, low for command) |
| RST | Reset, low active |
| BL | Backlight |
Useful Link:
Waveshare 2 Inch LCD Display Module
Package Included:
- 1 x 2inch LCD Module
- 1 x PH2.0 20cm 8Pin
MG996R Servo Motor MG996R Metal Gear Servo Motor - 180 Degree 
JX Servo PDI-HV2107MG Servo Motor 21g High Torque Digital Standard Servo For RC Model 
Nichicon GU 3300uF 80V Capacitor 25x45mm Snap-in PSU Capacitor High Voltage Electrolytic Capacitor For Power Supplies 
3.5mm Terminal Connector 3.5mm Pitch 2 pin 2 way Straight Pin PCB Screw Terminal Block Connector 
5V Mini Stepper Motor 28BYJ-48 Stepper Motor - 5V Unipolar 
Mechanical Robotic Arm Claw Robot Manipulator Mechanical Arm Metal Claws 
JoyStick Shield Module Joystick Shield Gamepad Analog Keyboard and Mouse Function for Arduino FR4 Wireless Bluetooth DIY Shield V1 Expansion Board Red For DIY Projects Simulated Keyboard Mouse RF Transceiver Module
Reviews
There are no reviews yet.