Description
Description:
This is a Waveshare 2-inch LCD Display Module. A general LCD Module with an IPS screen, 2-inch diagonal, 240×320 resolution, embedded controller, communicating via SPI interface. 2-inch LCDÂ Module supports Raspberry Pi, Arduino, STM32, etc.
Specifications:
| Operating Voltage | 3.3V / 5V |
| Resolution | 240 × 320 pixels |
| Communication Interface | 4-wire SPI |
| Display Size | 30.60 × 40.80mm |
| Display Panel | IPS |
| Pixel Size | 0.0975 × 0.0975mm |
| Driver | ST7789VW |
| Module Size | 58.0 × 35.0mm |
Features:
- 240×320 resolution, 262K colors, clear and colorful displaying effect
- SPI interface minimizes required IO pins
- Comes with online development resources (examples for Raspberry Pi/VisionFive2/Arduino/STM32)
Pin Description:
| VCC | Power (3.3V / 5V input) |
|---|---|
| GND | Ground |
| DIN | SPI data input |
| CLK | SPI clock input |
| CS | Chip selection, low active |
| DC | Data/Command selection (high for data, low for command) |
| RST | Reset, low active |
| BL | Backlight |
Useful Link:
Waveshare 2 Inch LCD Display Module
Package Included:
- 1 x 2inch LCD Module
- 1 x PH2.0 20cm 8Pin
Make A Line Follower Robot Using L293D Motor Driver Module Interfacing With Arduino Uno 
10x15mm Cable Drag Chain 10 x 15mm 1m Cable Drag Chain Wire Carrier 
300 RPM Single Shaft BO rectangle Motor 
10K OHM Rotary Potentiometer Audio Taper Log Pot 10K Solder Lugs Split Shaft Linear Rotary Potentiometer 
Bambu Lab A1 3D Printer 
RDS3115MG 15KG Standard Servo Kit RDS3115 360° Continuous Rotation Servo Kit For Robotics and Automation 
16x2 I2C LCD IIC/I2C 1602 LCD Module Blue Backlight 
1400KV BLDC Motor A2212 10T 1400KV Brushless Motor for Drone 
JX Servo PDI-HV2107MG Servo Motor 21g High Torque Digital Standard Servo For RC Model 
MG996R Servo Motor MG996R Metal Gear Servo Motor - 180 Degree
Reviews
There are no reviews yet.