Description
Description:
This is a Waveshare 2-inch LCD Display Module. A general LCD Module with an IPS screen, 2-inch diagonal, 240×320 resolution, embedded controller, communicating via SPI interface. 2-inch LCDÂ Module supports Raspberry Pi, Arduino, STM32, etc.
Specifications:
| Operating Voltage | 3.3V / 5V |
| Resolution | 240 × 320 pixels |
| Communication Interface | 4-wire SPI |
| Display Size | 30.60 × 40.80mm |
| Display Panel | IPS |
| Pixel Size | 0.0975 × 0.0975mm |
| Driver | ST7789VW |
| Module Size | 58.0 × 35.0mm |
Features:
- 240×320 resolution, 262K colors, clear and colorful displaying effect
- SPI interface minimizes required IO pins
- Comes with online development resources (examples for Raspberry Pi/VisionFive2/Arduino/STM32)
Pin Description:
| VCC | Power (3.3V / 5V input) |
|---|---|
| GND | Ground |
| DIN | SPI data input |
| CLK | SPI clock input |
| CS | Chip selection, low active |
| DC | Data/Command selection (high for data, low for command) |
| RST | Reset, low active |
| BL | Backlight |
Useful Link:
Waveshare 2 Inch LCD Display Module
Package Included:
- 1 x 2inch LCD Module
- 1 x PH2.0 20cm 8Pin
Ender-3 V3 Plus 3D Printer 
2 Pin Female JST Connector 2 Pin Battery Connector for JST RCY Plug Female Connectors Wire for RC Toys Battery 
DC Barrel Power Jack/Connector 
3296W Potentiometer Variable Resistor Kit 1K-1M Multi-Turn Trimmer DIY Electronics Kit Trimmer Potentiometer Build Your Own Trimmer Pot Variable Resistor DIY Kit Electronics DIY Projects 
5mm White Led Light Emitting Diode (Pack of 5) 
Bambu Lab PETG-CF 3D Printer Filament 1.75mm Indigo Blue
Reviews
There are no reviews yet.