Description
Description:
This is a Waveshare 2-inch LCD Display Module. A general LCD Module with an IPS screen, 2-inch diagonal, 240×320 resolution, embedded controller, communicating via SPI interface. 2-inch LCDÂ Module supports Raspberry Pi, Arduino, STM32, etc.
Specifications:
| Operating Voltage | 3.3V / 5V |
| Resolution | 240 × 320 pixels |
| Communication Interface | 4-wire SPI |
| Display Size | 30.60 × 40.80mm |
| Display Panel | IPS |
| Pixel Size | 0.0975 × 0.0975mm |
| Driver | ST7789VW |
| Module Size | 58.0 × 35.0mm |
Features:
- 240×320 resolution, 262K colors, clear and colorful displaying effect
- SPI interface minimizes required IO pins
- Comes with online development resources (examples for Raspberry Pi/VisionFive2/Arduino/STM32)
Pin Description:
| VCC | Power (3.3V / 5V input) |
|---|---|
| GND | Ground |
| DIN | SPI data input |
| CLK | SPI clock input |
| CS | Chip selection, low active |
| DC | Data/Command selection (high for data, low for command) |
| RST | Reset, low active |
| BL | Backlight |
Useful Link:
Waveshare 2 Inch LCD Display Module
Package Included:
- 1 x 2inch LCD Module
- 1 x PH2.0 20cm 8Pin
Y Type Servo Extension Wire 1JR Male To 2 Futaba Female Y Type Servo Extension Wire - 30cm 
220uF 100V Elna Silmic ARS Audio Capacitors 
Official Raspberry Pi 5 Case Red and White Raspberry Pi 5 ABS Case Raspberry Pi 5 Active Cooling PWM Fan Protection 
4S 15A BMS Board 4S 15A 18650 Lithium Battery Protection Board BMS Module 
MG90 Metal Gear Servo Motor 180 Degree Metal Gear Servo High Torque MG90 Servo(180 Degree Rotation) 
XY-L30A Battery Charge Control Module DC 6-60V Battery Charger 30A Lithium Battery Charger Battery Charging Control Module with LCD Display Charging Protection Board for Storage Batteries Timer-Based Battery Charger
Reviews
There are no reviews yet.