Description
Description:
This is a Waveshare 2-inch LCD Display Module. A general LCD Module with an IPS screen, 2-inch diagonal, 240×320 resolution, embedded controller, communicating via SPI interface. 2-inch LCDÂ Module supports Raspberry Pi, Arduino, STM32, etc.
Specifications:
| Operating Voltage | 3.3V / 5V |
| Resolution | 240 × 320 pixels |
| Communication Interface | 4-wire SPI |
| Display Size | 30.60 × 40.80mm |
| Display Panel | IPS |
| Pixel Size | 0.0975 × 0.0975mm |
| Driver | ST7789VW |
| Module Size | 58.0 × 35.0mm |
Features:
- 240×320 resolution, 262K colors, clear and colorful displaying effect
- SPI interface minimizes required IO pins
- Comes with online development resources (examples for Raspberry Pi/VisionFive2/Arduino/STM32)
Pin Description:
| VCC | Power (3.3V / 5V input) |
|---|---|
| GND | Ground |
| DIN | SPI data input |
| CLK | SPI clock input |
| CS | Chip selection, low active |
| DC | Data/Command selection (high for data, low for command) |
| RST | Reset, low active |
| BL | Backlight |
Useful Link:
Waveshare 2 Inch LCD Display Module
Package Included:
- 1 x 2inch LCD Module
- 1 x PH2.0 20cm 8Pin
1400KV BLDC Motor A2212 10T 1400KV Brushless Motor for Drone 
N20 Gear Motor 6V 400RPM Micro Gear Motor 3mm Shaft High-Torque Gear Motor N20 Micro Metal Gear Motor Powerful N20 Micro Gear Motor for Small Devices 
Radiolink M8N TS100 GPS Module Compass Module High Positioning Accuracy for Flight Controller DIY RC Drone FPV 
17HS3401 NEMA Stepper Motor NEMA 17 Stepper Motor NEMA 17 Stepper Motor With 4-Pin Cable Quiet And Smooth Stepper Motor For 3D Printing And CNC Machining 
MG90 Metal Gear Servo Motor 180 Degree Metal Gear Servo High Torque MG90 Servo(180 Degree Rotation)
Reviews
There are no reviews yet.