Description
Description:
This is a Waveshare 2-inch LCD Display Module. A general LCD Module with an IPS screen, 2-inch diagonal, 240×320 resolution, embedded controller, communicating via SPI interface. 2-inch LCDÂ Module supports Raspberry Pi, Arduino, STM32, etc.

Specifications:
| Operating Voltage | 3.3V / 5V |
| Resolution | 240 × 320 pixels |
| Communication Interface | 4-wire SPI |
| Display Size | 30.60 × 40.80mm |
| Display Panel | IPS |
| Pixel Size | 0.0975 × 0.0975mm |
| Driver | ST7789VW |
| Module Size | 58.0 × 35.0mm |
Features:
- 240×320 resolution, 262K colors, clear and colorful displaying effect
- SPI interface minimizes required IO pins
- Comes with online development resources (examples for Raspberry Pi/VisionFive2/Arduino/STM32)
Pin Description:

| VCC | Power (3.3V / 5V input) |
|---|---|
| GND | Ground |
| DIN | SPI data input |
| CLK | SPI clock input |
| CS | Chip selection, low active |
| DC | Data/Command selection (high for data, low for command) |
| RST | Reset, low active |
| BL | Backlight |
Useful Link:
Waveshare 2 Inch LCD Display Module
Package Included:
- 1 x 2inch LCD Module
- 1 x PH2.0 20cm 8Pin









Waveshare 4 inch LCD 10.16cm RPi LCD (A) 480x320 Raspberry Pi Display
Raspberry Pi 4 Model-B 4GB SDRAM Raspberry PI 4B SBC IOT Board - Broadcom 1.5GHZ A72 Processor
16x4 LCD Display Module Y-B Character LCD Display With Yellow Backlight Control
5mm Green LED Light Emitting Diode (Pack of 5)
L9110 Fan Module Fire Fighting Robot Fan Drive Module for Arduino
APM 2.8 Flight Controller Flight Control Board Straight Pin For Quadcopter Multicopter Flight Controller
7400 IC 74LS00 Quad 2 Input NAND Gate IC DIP-14
1045 Propeller 10*4.5 inch Propeller 10x4.5 CW CCW Propeller Pair for Quadcopter
Raspberry Pi Compute Module 4 - CM4001008 - 1GB RAM 8GB eMMC No Wireless
Royal Blue PLA PRO+
Ender 3 V3 KE 3D Printer
Radiolink F121 Flight Controller Board F121 Mini Four-axis FPV Drone DIY Entry-level Self-stable Flight Control Motherboard Image Transmission
Reviews
There are no reviews yet.