Description
Description:
This is a Waveshare 2-inch LCD Display Module. A general LCD Module with an IPS screen, 2-inch diagonal, 240×320 resolution, embedded controller, communicating via SPI interface. 2-inch LCDÂ Module supports Raspberry Pi, Arduino, STM32, etc.
Specifications:
| Operating Voltage | 3.3V / 5V |
| Resolution | 240 × 320 pixels |
| Communication Interface | 4-wire SPI |
| Display Size | 30.60 × 40.80mm |
| Display Panel | IPS |
| Pixel Size | 0.0975 × 0.0975mm |
| Driver | ST7789VW |
| Module Size | 58.0 × 35.0mm |
Features:
- 240×320 resolution, 262K colors, clear and colorful displaying effect
- SPI interface minimizes required IO pins
- Comes with online development resources (examples for Raspberry Pi/VisionFive2/Arduino/STM32)
Pin Description:
| VCC | Power (3.3V / 5V input) |
|---|---|
| GND | Ground |
| DIN | SPI data input |
| CLK | SPI clock input |
| CS | Chip selection, low active |
| DC | Data/Command selection (high for data, low for command) |
| RST | Reset, low active |
| BL | Backlight |
Useful Link:
Waveshare 2 Inch LCD Display Module
Package Included:
- 1 x 2inch LCD Module
- 1 x PH2.0 20cm 8Pin
12 PU Connector PMM 12mm OD Union Bulkhead Connector PMM 12 Union Bulkhead For Industrial Applications 
Skydroid H16 Remote Control With Receiver Reliable Long-Range Control For Drone UAV Digital Video Transmission Agricultural Drone Remote Controller Drone Part 
2 Pin 7-Colour LED Transparent 5mm Water Clear RGB LED Flashing Round LED Light Emitting Diode High Brightness 
12V 500RPM Gear Motor Centre Shaft DC Geared Motor Heavy Duty Motor for Robotics 
Horizontal Limit Switch Module Horizontal Mechanical Limit Switch Module 3D Printer Limit Switch Module For Ender 3 Pro With Cable 
4 x 18650 Battery Holder 18650 Battery Case Plastic Storage Box Holder For 4 Cell 18650 Battery Storage Box Without Cover - Black 
Raspberry Pi 5MP Camera Module Raspberry Pi Camera v1.3 with Cable High-Quality Camera for Raspberry Pi 3/4 Model B/B+ 
Radiolink R8FG RC Receiver 2.4Ghz R8FG V2.1 3ms Latency 8 Channels Gyro Receiver with Voltage Telemetry, Waterproof RX for RC Crawler Car Boat Radio Controller RC8X/RC6GS V3/RC4GS V3/RC6GS V2/RC4GS V2/T8FB/T8S 
10x15mm Cable Drag Chain 10 x 15mm 1m Cable Drag Chain Wire Carrier 
Bambu Lab A1 3D Printer
Reviews
There are no reviews yet.