Description
Description:
This is a Waveshare 2-inch LCD Display Module. A general LCD Module with an IPS screen, 2-inch diagonal, 240×320 resolution, embedded controller, communicating via SPI interface. 2-inch LCDÂ Module supports Raspberry Pi, Arduino, STM32, etc.
Specifications:
| Operating Voltage | 3.3V / 5V |
| Resolution | 240 × 320 pixels |
| Communication Interface | 4-wire SPI |
| Display Size | 30.60 × 40.80mm |
| Display Panel | IPS |
| Pixel Size | 0.0975 × 0.0975mm |
| Driver | ST7789VW |
| Module Size | 58.0 × 35.0mm |
Features:
- 240×320 resolution, 262K colors, clear and colorful displaying effect
- SPI interface minimizes required IO pins
- Comes with online development resources (examples for Raspberry Pi/VisionFive2/Arduino/STM32)
Pin Description:
| VCC | Power (3.3V / 5V input) |
|---|---|
| GND | Ground |
| DIN | SPI data input |
| CLK | SPI clock input |
| CS | Chip selection, low active |
| DC | Data/Command selection (high for data, low for command) |
| RST | Reset, low active |
| BL | Backlight |
Useful Link:
Waveshare 2 Inch LCD Display Module
Package Included:
- 1 x 2inch LCD Module
- 1 x PH2.0 20cm 8Pin
12x8cm Double-Sided PCB Double Side Copper Prototype Universal PCB Prototype Board 
5010 360KV Drone Motor High Torque 5010 Brushless Motor High Performance Drone Motor Heavy Lift Drone Motor For FPV and Racing Drones 
Bonka 2200mAh Lipo Battery 11.1V 35C Lithium Polymer Battery XT60 Connector 11.1V 3S Lipo Battery 
Radiolink Byme-D Flight Controller Radiolink Byme-D Stabilizer 3 Channels Flight Controller with Gyroscope 3D Fly FC for Delta Wing Paper Plane 
GT2 Timing Belt 10M GT2 Width 6mm Black Open Timing Belt For 3D Printer 
EU Plug Universal Battery Charger Single Cell Battery Charger For 18650, 16340, 14500, Li-ion Rechargeable Battery Charger
Reviews
There are no reviews yet.