Description
Description:
The 7S 20A BMS Board is for 7 series lithium batteries, it can be used for ternary lithium batteries, manganese acid lithium batteries, cobalt acid lithium batteries and LiFePO4 batteries. Stable various protective functions for charging and discharging, such as accurate overcharge protection, over-discharge protection, over-current protection and short circuit protection.
Batteries core hardware balanced processing, properly balanced current, and reasonably balanced heat emitting, do not affect the performance of battery pack. 7S 20A BMS Board has an aluminium sheet that would enhance heat dissipation for the MOS tube, and extend the service life of the MOS tube. 7S 20A BMS Board has Low quiescent power consumption, and overall power consumption is less than 30mA.
Specifications:
- Equilibrium Current: 80 mA (VCELL = 4.20 V)
- Supported Battery Type: V 7 cells 4.2 V lithium-ion battery
- Balancing Control Locus: 4.18 ± 03 V
- Overload Threshold: 4.3 ± 05 V
- Recharge Delay: 75 ms
- Overload Release: 4.1 ± 05 V
- Discharge Threshold: 2.4 ± 08 V
- Discharge Delay: 5 ms
- Operating Current: 20 A
- Over Current Threshold: 30 A
- Static Power: <500uA Overcharge
- protection Function: Yes
- Discharge Protection Function: Yes
- Current Protection Function: Yes
- Balanced Protection Function: Yes

Features:
- 7S 20A BMS Board has overcharge protection, over-discharge protection, over-current protection and short circuit protection.
- Batteries core hardware balanced processing, properly balanced current, and reasonably balanced heat emitting, do not affect the performance of the battery pack.
- 7S 20A BMS Board has an aluminium sheet that would enhance heat dissipation for the MOS tube, and extend the service life of the MOS tube.
- Low quiescent power consumption and overall power consumption is less than 30mA.
Package Included:
1 x 7S 20A BMS Board 7S 20A Lithium Li-ion LiFePO4 Battery BMS Protection Board with Balancing for Battery Protection Board









MK8 3D Printer Hotend Extruder Kit, 24V 40W MK8 Assembled Extruder Kit for Ender 3 PRO Compatible with Creality CR Series/Ender Series with Aluminum Heating Block 1.75mm, 0.4mm Nozzle (Red)
Robobloq Qoopers 6 in 1 Programming Robot Building Kit with Remote Control, LED Matrix, Ultrasonic Sensor etc. for Scratch Arduino Python Learning, Coding Toy for Kids
Radiolink Mini PIX Flight Controller Mini Pixhawk Controller Mini Pix APM Flight Controller V1.2 FC for 3-6 Axis FPV Drone/Helicopter/Aircraft/Quad/Car/Boat
N20 Motor with Wheel N20 Geared Motor Rubber Wheel Kit 12V
Bambu Lab PETG-CF 3D Printer Filament 1.75mm Malachite Green
Waveshare 4.3inch Capacitive Touch LCD 800x480 Pixels Resolution IPS Panel 216 Colors Via 24-Bit RGB Interface For Pi
1555 Propeller 15x5.5 2 Blades Carbon Fiber CW/CCW Propeller For T-Motor
Raspberry Pi Compute Module 4 - CM4004032 - 4GB RAM 32GB eMMC No Wireless
12 PU Connector PMM 12mm OD Union Bulkhead Connector PMM 12 Union Bulkhead For Industrial Applications
Nichicon GU 3300uF 80V Capacitor 25x45mm Snap-in PSU Capacitor High Voltage Electrolytic Capacitor For Power Supplies
10K Ohm Resistor, 10K Ohm Resistance 1/4W Power Rating 5%
2 Pin Female JST Connector 2 Pin Battery Connector for JST RCY Plug Female Connectors Wire for RC Toys Battery
2Wd Transparent Smart Motor Robot Car Battery Box Chassis Kit For Arduino
EL Wire LED Lights Glow EL Wire String Strip 1M Neon Lights Noise Reduction Neon Glowing Strobing Electroluminescent Wire For Parties, Halloween, DIY Decoration - Orange
10K OHM Rotary Potentiometer Audio Taper Log Pot 10K Solder Lugs Split Shaft Linear Rotary Potentiometer
5S 15A BMS Board 5S 18.5V 15A Li-Ion Lithium Battery Protection Board
Reviews
There are no reviews yet.