Description
Description:
The 7S 20A BMS Board is for 7 series lithium batteries, it can be used for ternary lithium batteries, manganese acid lithium batteries, cobalt acid lithium batteries and LiFePO4 batteries. Stable various protective functions for charging and discharging, such as accurate overcharge protection, over-discharge protection, over-current protection and short circuit protection.
Batteries core hardware balanced processing, properly balanced current, and reasonably balanced heat emitting, do not affect the performance of battery pack. 7S 20A BMS Board has an aluminium sheet that would enhance heat dissipation for the MOS tube, and extend the service life of the MOS tube. 7S 20A BMS Board has Low quiescent power consumption, and overall power consumption is less than 30mA.
Specifications:
- Equilibrium Current: 80 mA (VCELL = 4.20 V)
- Supported Battery Type: V 7 cells 4.2 V lithium-ion battery
- Balancing Control Locus: 4.18 ± 03 V
- Overload Threshold: 4.3 ± 05 V
- Recharge Delay: 75 ms
- Overload Release: 4.1 ± 05 V
- Discharge Threshold: 2.4 ± 08 V
- Discharge Delay: 5 ms
- Operating Current: 20 A
- Over Current Threshold: 30 A
- Static Power: <500uA Overcharge
- protection Function: Yes
- Discharge Protection Function: Yes
- Current Protection Function: Yes
- Balanced Protection Function: Yes

Features:
- 7S 20A BMS Board has overcharge protection, over-discharge protection, over-current protection and short circuit protection.
- Batteries core hardware balanced processing, properly balanced current, and reasonably balanced heat emitting, do not affect the performance of the battery pack.
- 7S 20A BMS Board has an aluminium sheet that would enhance heat dissipation for the MOS tube, and extend the service life of the MOS tube.
- Low quiescent power consumption and overall power consumption is less than 30mA.
Package Included:
1 x 7S 20A BMS Board 7S 20A Lithium Li-ion LiFePO4 Battery BMS Protection Board with Balancing for Battery Protection Board








5V 1A 7805 Voltage Regulator
CH340 Nano Board CH340/ATmega328P without USB Cable, Compatible with Arduino Nano V3.0 (Soldered)
Raspberry Pi Zero W Development Board with Built-in WiFi & Bluetooth (802.11 b/g/n wireless LAN Support Bluetooth 4.1 and Bluetooth Low Energy-BLE )
Bambu Lab PETG-CF 3D Printer Filament 1.75mm Malachite Green
5400mAh Lipo Battery 14.8V 5400mAh 4S 30C Lithium Polymer Battery
SafeConnect 30Cm Flat Servo Extension Cable 30cm Flat Futaba Servo Extension Cable 22AWG Servo Extension Lead Durable Flat Servo Extension For High-Quality Servo Extension
L9110 Fan Module Fire Fighting Robot Fan Drive Module for Arduino
SMD electrolytic Capacitor, 200PCS 10V - 50V 1uF - 470uF 10Values Capacitor Assortment kit Capacitor with Storage Box
10K OHM Rotary Potentiometer Audio Taper Log Pot 10K Solder Lugs Split Shaft Linear Rotary Potentiometer
Raspberry Pi 5 Single Board Computer with 2.4GHz quad-core, 64-bit Arm Cortex-A76, and LPDDR4X-4267 SDRAM 4GB
Raspberry Pi Compute Module 4 - CM4004032 - 4GB RAM 32GB eMMC No Wireless
Raspberry Pi 3 A+ Pi 3 Model A Plus SBC Board Cortex A53-512 MB RAM
Make A Line Follower Robot Using L293D Motor Driver Module Interfacing With Arduino Uno
Female Deans T-Plug Connector Deans Connector For RC LiPo Battery T-Plug Connector For ESC High-Quality Deans Connector For RC Applications
Reviews
There are no reviews yet.