Description
Description:
The 7S 20A BMS Board is for 7 series lithium batteries, it can be used for ternary lithium batteries, manganese acid lithium batteries, cobalt acid lithium batteries and LiFePO4 batteries. Stable various protective functions for charging and discharging, such as accurate overcharge protection, over-discharge protection, over-current protection and short circuit protection.
Batteries core hardware balanced processing, properly balanced current, and reasonably balanced heat emitting, do not affect the performance of battery pack. 7S 20A BMS Board has an aluminium sheet that would enhance heat dissipation for the MOS tube, and extend the service life of the MOS tube. 7S 20A BMS Board has Low quiescent power consumption, and overall power consumption is less than 30mA.
Specifications:
- Equilibrium Current: 80 mA (VCELL = 4.20 V)
- Supported Battery Type: V 7 cells 4.2 V lithium-ion battery
- Balancing Control Locus: 4.18 ± 03 V
- Overload Threshold: 4.3 ± 05 V
- Recharge Delay: 75 ms
- Overload Release: 4.1 ± 05 V
- Discharge Threshold: 2.4 ± 08 V
- Discharge Delay: 5 ms
- Operating Current: 20 A
- Over Current Threshold: 30 A
- Static Power: <500uA Overcharge
- protection Function: Yes
- Discharge Protection Function: Yes
- Current Protection Function: Yes
- Balanced Protection Function: Yes

Features:
- 7S 20A BMS Board has overcharge protection, over-discharge protection, over-current protection and short circuit protection.
- Batteries core hardware balanced processing, properly balanced current, and reasonably balanced heat emitting, do not affect the performance of the battery pack.
- 7S 20A BMS Board has an aluminium sheet that would enhance heat dissipation for the MOS tube, and extend the service life of the MOS tube.
- Low quiescent power consumption and overall power consumption is less than 30mA.
Package Included:
1 x 7S 20A BMS Board 7S 20A Lithium Li-ion LiFePO4 Battery BMS Protection Board with Balancing for Battery Protection Board








NEMA23 Hybrid Stepper Motor 30.61 kg-cm Single Shaft 1.8 Degree Hybrid Stepper Motor Shaft Diameter 8mm
Robobloq Qoopers 6 in 1 Programming Robot Building Kit with Remote Control, LED Matrix, Ultrasonic Sensor etc. for Scratch Arduino Python Learning, Coding Toy for Kids
Radiolink Mini PIX Flight Controller Mini Pixhawk Controller Mini Pix APM Flight Controller V1.2 FC for 3-6 Axis FPV Drone/Helicopter/Aircraft/Quad/Car/Boat
DIY D2-1 Intelligent Line Follower Car Kit DIY Smart Tracking Robot Car Electronic Kit With Reduction Motor Set
Smart Robot Car 2WD Chassis Kit with Ultrasonic Module R3 Board
ULN2003 Stepper Motor Driver ULN2003A Driver Module Stepper Motor Driver Board
Fluo Popsicle Green PLA PRO+
Bambu Lab A1 3D Printer
1*40 Single Row Female Pin Header Connector Strip(2.54mm Pitch)
32 Channel Robot Servo Control Board Servo Motor Controller PS2 Wireless Control USB/UART Connection Mode Versatile Servo Controller For Robotics And Automation Projects
Bambu Lab A1 Mini 3D Printer
7400 IC 74LS00 Quad 2 Input NAND Gate IC DIP-14
PBS-11B Round Plastic Self-Reset Switch 12mm 2-Pin Momentary Push Button Switch For Quick On/Off Control
Single 18650 Battery Holder With Wire Leads and Spring Contacts 3.7v Battery Case Reliable 18650 Battery Holder For Your Projects
KK2.1 Flight Controller KK2.1 Multi-rotor LCD Flight Control Board With 6050MPU And Atmel
7S 20A BMS Board 7S 20A Lithium Li-ion LiFePO4 Battery BMS Protection Board with Balancing for Battery Protection Board
Raspberry Pi Zero V1.3 Single-Core CPU Support Micro USB Power, Camera And Micro SD Card
100Pcs Diode Assortment Kit Diode Kit 10 Values Rectifier Diode Assortment Electronic Kit 1N4001~1N4007 1N5817~1N5819 With clear Box, Zener Diodes
PX4 V2.4.8 32Bit Flight Controller + NEO-M8N GPS + Power Module Multicopter FPV Quadcopter
T0-92 Power Transistor assortment Kit NPN PNP Kit Set Three Pins 15 Values 300PCS (20pcs each) with Clear Plastic
0.8mm 3D Printer Nozzle Head M7 Thread Replacement for MK10 1.75mm Extruder Print
2x40 Pins Male Header 2x40 Pin 2.54mm Pitch Male Berg Strip-Right Angle
Crystal Clear PLA PRO+
Reviews
There are no reviews yet.