Description
Description:
The 7S 20A BMS Board is for 7 series lithium batteries, it can be used for ternary lithium batteries, manganese acid lithium batteries, cobalt acid lithium batteries and LiFePO4 batteries. Stable various protective functions for charging and discharging, such as accurate overcharge protection, over-discharge protection, over-current protection and short circuit protection.
Batteries core hardware balanced processing, properly balanced current, and reasonably balanced heat emitting, do not affect the performance of battery pack. 7S 20A BMS Board has an aluminium sheet that would enhance heat dissipation for the MOS tube, and extend the service life of the MOS tube. 7S 20A BMS Board has Low quiescent power consumption, and overall power consumption is less than 30mA.
Specifications:
- Equilibrium Current: 80 mA (VCELL = 4.20 V)
- Supported Battery Type: V 7 cells 4.2 V lithium-ion battery
- Balancing Control Locus: 4.18 ± 03 V
- Overload Threshold: 4.3 ± 05 V
- Recharge Delay: 75 ms
- Overload Release: 4.1 ± 05 V
- Discharge Threshold: 2.4 ± 08 V
- Discharge Delay: 5 ms
- Operating Current: 20 A
- Over Current Threshold: 30 A
- Static Power: <500uA Overcharge
- protection Function: Yes
- Discharge Protection Function: Yes
- Current Protection Function: Yes
- Balanced Protection Function: Yes

Features:
- 7S 20A BMS Board has overcharge protection, over-discharge protection, over-current protection and short circuit protection.
- Batteries core hardware balanced processing, properly balanced current, and reasonably balanced heat emitting, do not affect the performance of the battery pack.
- 7S 20A BMS Board has an aluminium sheet that would enhance heat dissipation for the MOS tube, and extend the service life of the MOS tube.
- Low quiescent power consumption and overall power consumption is less than 30mA.
Package Included:
1 x 7S 20A BMS Board 7S 20A Lithium Li-ion LiFePO4 Battery BMS Protection Board with Balancing for Battery Protection Board









Bambu Lab X1E 3D Printer Combo
Mega Pro Mini MEGA2560 Pro ATMEGA2560-16AU USB CH340G Development Board
Waveshare 2inch LCD Display Module for Raspberry Pi Pico, 65K Colors, 320×240, SPI
Raspberry Pi 4 Model-B 8GB SDRAM Raspberry PI 4B SBC IOT Board - Broadcom 1.5GHZ A72 Processor
20x2 LCD Display With Green Backlight 20 Character x 2 Lines Compact LCD Display For Electronic Projects
8-Pin 8pins DIL DIP IC Socket PCB Mount Connector
JX Servo D56MG Servo Motor D56MG 5.6g Coreless LV Low Voltage DS/MG Metal Gear Servo 0.89kg 0.10sec
Radiolink R6FG RC Receiver R6FG 6 Channels 2.4GHz RC Receiver with Gyro, Surface Long Range Control RX for Vehicle Drifting/Crawler/Truck/Boat Works with Radio Controller RC4GS V3/RC6GS V3/RC4GS V2/RC6GS V2/T8FB/T8S
5010 750KV Brushless Motor 5010 750KV High Torque Brushless Motor for Drone
MG945 Servo Motor 180 Degree 12Kg Precision Servo With Wide Rotation Range And High-Torque Servo For RC Applications
Waveshare 3.5inch Resistive Touch Screen LCD, 480×320, HDMI, IPS, Various Devices & Systems Support
Waveshare 10.1inch Capacitive Touch Screen (B) LCD With Case 10.1" Touchscreen LCD IPS Touchscreen With HDMI Input High-Resolution, Low-Power Touchscreen
Lavender Purple PLA PRO+
Radiolink R7FG RC Receiver R7FG 7 Channels RC Gyro Receiver, Voltage Telemetry Long Range Control, Water-Splash Proof for RC Crawler Drifting Car, Boat, Works for 2.4Gh Radio Controller RC8X/RC4GS V3/RC6GS V3/T8S/T8FB
2x18650 Battery Holder 18650 x 2 Battery Holder with Cover and On/Off Switch With Open End Wires
Skydroid H16 Remote Control With Receiver Reliable Long-Range Control For Drone UAV Digital Video Transmission Agricultural Drone Remote Controller Drone Part
2 Pin Female JST Connector 2 Pin Battery Connector for JST RCY Plug Female Connectors Wire for RC Toys Battery
EMAX Bullet Series 35A ESC (BLHELI_S) with Oneshot (Original)
Radiolink SUI04 Ultrasonic Sensor Range Finder Obstacle Avoidance for Racing Drone, Robots, Quadcopter, Multi-Copter
5400mAh Lipo Battery 14.8V 5400mAh 4S 30C Lithium Polymer Battery
12x8cm Double-Sided PCB Double Side Copper Prototype Universal PCB Prototype Board
2x18650 Battery Holder Black Plastic Storage Box Case Holder For Battery 2 x 18650 Cell Box, Without Cover
Reviews
There are no reviews yet.