Description
Description:
The 7S 20A BMS Board is for 7 series lithium batteries, it can be used for ternary lithium batteries, manganese acid lithium batteries, cobalt acid lithium batteries and LiFePO4 batteries. Stable various protective functions for charging and discharging, such as accurate overcharge protection, over-discharge protection, over-current protection and short circuit protection.
Batteries core hardware balanced processing, properly balanced current, and reasonably balanced heat emitting, do not affect the performance of battery pack. 7S 20A BMS Board has an aluminium sheet that would enhance heat dissipation for the MOS tube, and extend the service life of the MOS tube. 7S 20A BMS Board has Low quiescent power consumption, and overall power consumption is less than 30mA.
Specifications:
- Equilibrium Current: 80 mA (VCELL = 4.20 V)
- Supported Battery Type: V 7 cells 4.2 V lithium-ion battery
- Balancing Control Locus: 4.18 ± 03 V
- Overload Threshold: 4.3 ± 05 V
- Recharge Delay: 75 ms
- Overload Release: 4.1 ± 05 V
- Discharge Threshold: 2.4 ± 08 V
- Discharge Delay: 5 ms
- Operating Current: 20 A
- Over Current Threshold: 30 A
- Static Power: <500uA Overcharge
- protection Function: Yes
- Discharge Protection Function: Yes
- Current Protection Function: Yes
- Balanced Protection Function: Yes

Features:
- 7S 20A BMS Board has overcharge protection, over-discharge protection, over-current protection and short circuit protection.
- Batteries core hardware balanced processing, properly balanced current, and reasonably balanced heat emitting, do not affect the performance of the battery pack.
- 7S 20A BMS Board has an aluminium sheet that would enhance heat dissipation for the MOS tube, and extend the service life of the MOS tube.
- Low quiescent power consumption and overall power consumption is less than 30mA.
Package Included:
1 x 7S 20A BMS Board 7S 20A Lithium Li-ion LiFePO4 Battery BMS Protection Board with Balancing for Battery Protection Board






Bambu Lab TPU 95A HF 1.75mm 3D Filament Grey
MK8 3D Printer Hotend Extruder Kit, 24V 40W MK8 Assembled Extruder Kit for Ender 3 PRO Compatible with Creality CR Series/Ender Series with Aluminum Heating Block 1.75mm, 0.4mm Nozzle (Red)
Radiolink R8FM RC Receiver R8FM 8 Channels 2.4GHz Micro RC Receiver SBUS/PPM for Mini FPV Racing Drone, Quad, Aircraft T8S/T8FB Transmitter
Raspberry Pi Fisheye Camera 5MP Wide Angle Camera 160° 15-Pin Pi Camera MIPI Interface Raspberry Pi Camera for Raspberry Pi 2/3/4/B/B+/Zero/W/2W
Tactile Switch Small Mini Micro Tactile Push Button
Raspberry Pi OV5647 Camera 5MP 1080P IR-Cut Camera Module for Raspberry Pi 3/4 Raspberry Pi Camera Module with Manual Day/Night Mode High-Resolution IR-Cut Camera for Raspberry Pi Projects
100pcs 10 Values 500ohm-1M ohm Film Variable Resistor Potentiometer Rheostat Trimpot Assortment Kit
Reviews
There are no reviews yet.