Description
Description:
If you are wandering to navigate the distance with a drone then this NEO 7M GPS Module is needed. GPS drones are equipped with a NEO 7M GPS Module that lets them know their location relative to a network of satellites. Connecting to signals from these satellites allows the drone to perform functions such as position hold, autonomous flight, return to home, and waypoint navigation.
NEO 7M GPS Module that includes an HMC5883L digital compass. The new NEO 7 series is a high-sensitivity, low-power GPS module with 56 channels and outputs precise position updates at 10Hz. This NEO 7M GPS Module also comes with a molded plastic case which keeps the module protected against the elements making it ideal for use on your aircraft or quadcopter.
This NEO 7M GPS Module uses an active circuitry ceramic patch antenna to provide an excellent GPS signal which outperforms the older Neo 6 series modules. This NEO 7M GPS Module also includes a rechargeable backup battery to allow for HOT starts and also includes an I²C EEPROM to store the configuration settings.  Out of the box, this NEO 7M GPS Module is configured to run at 38400 Baud and is configured to run with APM/Pixhawk systems.  This NEO 7M GPS Module includes two cables, a 6-pin connector for the GPS module, and a 4-pin connector for the i2c compass.
Specifications:
- Model: NEO 7M
- Receiver Type:Â 56 Channels, Galileo E1B/C1, GPS L1C/A, QZSS L1C/A, SBAS L1C/A
- Receiver Frequency:Â L1 [1575.42MHz]
- Input Supply Voltage: 3.5 ~ 5.5V DC
- Main Chip:Â U-BLOX NEO-7M
- Sensitivity (dBm):Â -155, -160, Cold Start (without aiding): -147 dBm, Tracking & Navigation: -161 dBm
- Position Accuracy: 2, 2.5Meter
- Acceleration: <4g
- Navigation Update Rate:Â 5Hz
- Operating Temperature Range: -24 to 84°C
- Tracking Sensitivity: -161 DBM
- Co-Ordinate System:Â WGS-84
- Capture Time:Â 0.1s Average
- Avg Cold Start Time:Â 38s
- Warm Start Time: 35s
- Boot Time:Â 1S
- Maximum Altitude:Â 18000m
- Maximum Speed:Â 515 m/s
Features:
- Locate performance
- Super Bright LED
- compass on board
- 4-pin connector for only GPS use
- 1Hz (Default) Changed to 5Hz!
- Permanent Configuration Retention
- Output GGA, GSA, and RMC frames
- 38400 bps (Default) Changed to 115200bps!
- 4-pin connector for compass only use
- The 6-pin connector for EZ connects to MEGA BLACK
- NEO 7M GPS Module can use both 4 pins at once.
- Backplane with Standard Mk style mounting holes 45mm X 45mm
- These are Pre-configured, Flashed with the correct settings, and tested. To make them Plug and Play.
Package Included:
1 x NEO 7M GPS Module NEO 7M GPS With Compass for APM 2.6/2.8 and Pixhawk 2.4.6/2.4.8








Amass XT30UPB-M30.G.Y Male Connector XT30UPB30 Connector for FPV Racing Quadcopter Multirotor Airplane
Bambu Lab A1 3D Printer Combo AMS lite
DM002 DIY Drone Kit DM002 2.4GHz RC Quadcopter DM002 Remote Control Quadcopter Drone Best Ideal Gift For Beginners ( Camera Included)
5mm LED Kit 100pcs 5mm Light Assorted Kit DIY LEDs Set (20 LEDs x White Yellow Red Green Blue)
NEO 7M GPS Module NEO 7M GPS With Compass for APM 2.6/2.8 and Pixhawk 2.4.6/2.4.8
Raspberry Pi 3 Model B+ RPI 3 B Plus with 1GB BCM2837B0 1.4 GHz Arm Cortex-A53 Support WiFi 2.4 GHz and Bluetooth 4.2
Radiolink Divit Digital Video Transmission Adapter Board for DJI DIGITAL FPV SYSTEM, DJI O3 Air Unit, Caddx Walksnail Avatar HD System, compatible with Mini Pix, Crossflight, PIXHAWK
Raspberry Pi 4 TFT 3.5 inch Touch Screen with Case, 480x320 Resolution 60fps Monitor LCD Display
Raspberry Pi 3B+ Starter Kit: Your All-in-One DIY Computer Pi 3B+ Starter Pack Ideal For Coding, Programming And More
4-Pin 30A Rocker Switch 250V 12V Illuminated Rocker Switch UL Illuminated Rocker Switch Brighten Up Your Projects With Illuminated Rocker Switch
2x18650 Battery Holder Black Plastic Storage Box Case Holder For Battery 2 x 18650 Cell Box, Without Cover
XY-L30A Battery Charge Control Module DC 6-60V Battery Charger 30A Lithium Battery Charger Battery Charging Control Module with LCD Display Charging Protection Board for Storage Batteries Timer-Based Battery Charger
DS3235MG 35KG Digital Servo Motor 35KG 270° High Torque Servo Motor With Metal Gear Servo Motor Arduino High Torque Servo Precise Position Control For Arduino Projects - Position Rotation
16 Pin DIP IC Socket-Base-Connector suited for Microcontrollers & IC's
Raspberry Pi Compute Module 4 - CM4002008 - 2GB RAM 8GB eMMC No Wireless
Reviews
There are no reviews yet.