Description
Description:
If you are wandering to navigate the distance with a drone then this NEO 7M GPS Module is needed. GPS drones are equipped with a NEO 7M GPS Module that lets them know their location relative to a network of satellites. Connecting to signals from these satellites allows the drone to perform functions such as position hold, autonomous flight, return to home, and waypoint navigation.
NEO 7M GPS Module that includes an HMC5883L digital compass. The new NEO 7 series is a high-sensitivity, low-power GPS module with 56 channels and outputs precise position updates at 10Hz. This NEO 7M GPS Module also comes with a molded plastic case which keeps the module protected against the elements making it ideal for use on your aircraft or quadcopter.
This NEO 7M GPS Module uses an active circuitry ceramic patch antenna to provide an excellent GPS signal which outperforms the older Neo 6 series modules. This NEO 7M GPS Module also includes a rechargeable backup battery to allow for HOT starts and also includes an I²C EEPROM to store the configuration settings.  Out of the box, this NEO 7M GPS Module is configured to run at 38400 Baud and is configured to run with APM/Pixhawk systems.  This NEO 7M GPS Module includes two cables, a 6-pin connector for the GPS module, and a 4-pin connector for the i2c compass.
Specifications:
- Model: NEO 7M
- Receiver Type:Â 56 Channels, Galileo E1B/C1, GPS L1C/A, QZSS L1C/A, SBAS L1C/A
- Receiver Frequency:Â L1 [1575.42MHz]
- Input Supply Voltage: 3.5 ~ 5.5V DC
- Main Chip:Â U-BLOX NEO-7M
- Sensitivity (dBm):Â -155, -160, Cold Start (without aiding): -147 dBm, Tracking & Navigation: -161 dBm
- Position Accuracy: 2, 2.5Meter
- Acceleration: <4g
- Navigation Update Rate:Â 5Hz
- Operating Temperature Range: -24 to 84°C
- Tracking Sensitivity: -161 DBM
- Co-Ordinate System:Â WGS-84
- Capture Time:Â 0.1s Average
- Avg Cold Start Time:Â 38s
- Warm Start Time: 35s
- Boot Time:Â 1S
- Maximum Altitude:Â 18000m
- Maximum Speed:Â 515 m/s
Features:
- Locate performance
- Super Bright LED
- compass on board
- 4-pin connector for only GPS use
- 1Hz (Default) Changed to 5Hz!
- Permanent Configuration Retention
- Output GGA, GSA, and RMC frames
- 38400 bps (Default) Changed to 115200bps!
- 4-pin connector for compass only use
- The 6-pin connector for EZ connects to MEGA BLACK
- NEO 7M GPS Module can use both 4 pins at once.
- Backplane with Standard Mk style mounting holes 45mm X 45mm
- These are Pre-configured, Flashed with the correct settings, and tested. To make them Plug and Play.
Package Included:
1 x NEO 7M GPS Module NEO 7M GPS With Compass for APM 2.6/2.8 and Pixhawk 2.4.6/2.4.8









NEO 7M GPS Module NEO 7M GPS With Compass for APM 2.6/2.8 and Pixhawk 2.4.6/2.4.8
12x18cm Double Sided PCB Board Universal Soldering PCB Board Tinned Through Holes Universal Printed Circuit Proto Board 2.54mm
Bonka 2200mAh Lipo Battery 11.1V 35C Lithium Polymer Battery XT60 Connector 11.1V 3S Lipo Battery
SMD electrolytic Capacitor, 200PCS 10V - 50V 1uF - 470uF 10Values Capacitor Assortment kit Capacitor with Storage Box
Universal GPS Mount Universal GPS Folding Antenna Base Set, GPS Fixed Mount Base Antenna Signal Foldable Seat For Quadcopter Racing Drone
470uF 63V Electrolytic Capacitor
Single-Sided 2.54mm Hole Pitch FR-4 PCB Tinned BoardSingle-Sided 10x15cm Universal PCB
N20 Micro Gear Motor 12V 120 RPM Micro Metal Gear Motor With Encoder High-Torque Low-Speed Precision Micro Gear Motor
Raspberry Pi Zero WH Pi Zero WH Wireless Raspberry Pi 0 WH Built-In WiFi And Bluetooth Pre-soldered GPIO Headers
2Wd Transparent Smart Motor Robot Car Battery Box Chassis Kit For Arduino
XYQ-6 DIY Wooden Drone with Camera Kit for Kids or Beginner, 2.4GHz RC Quadcopter with Altitude Hold, Headless Mode, 3D Flip and One Key Lift
Reviews
There are no reviews yet.