Description
Description:
If you are wandering to navigate the distance with a drone then this NEO 7M GPS Module is needed. GPS drones are equipped with a NEO 7M GPS Module that lets them know their location relative to a network of satellites. Connecting to signals from these satellites allows the drone to perform functions such as position hold, autonomous flight, return to home, and waypoint navigation.
NEO 7M GPS Module that includes an HMC5883L digital compass. The new NEO 7 series is a high-sensitivity, low-power GPS module with 56 channels and outputs precise position updates at 10Hz. This NEO 7M GPS Module also comes with a molded plastic case which keeps the module protected against the elements making it ideal for use on your aircraft or quadcopter.
This NEO 7M GPS Module uses an active circuitry ceramic patch antenna to provide an excellent GPS signal which outperforms the older Neo 6 series modules. This NEO 7M GPS Module also includes a rechargeable backup battery to allow for HOT starts and also includes an I²C EEPROM to store the configuration settings.  Out of the box, this NEO 7M GPS Module is configured to run at 38400 Baud and is configured to run with APM/Pixhawk systems.  This NEO 7M GPS Module includes two cables, a 6-pin connector for the GPS module, and a 4-pin connector for the i2c compass.
Specifications:
- Model: NEO 7M
- Receiver Type:Â 56 Channels, Galileo E1B/C1, GPS L1C/A, QZSS L1C/A, SBAS L1C/A
- Receiver Frequency:Â L1 [1575.42MHz]
- Input Supply Voltage: 3.5 ~ 5.5V DC
- Main Chip:Â U-BLOX NEO-7M
- Sensitivity (dBm):Â -155, -160, Cold Start (without aiding): -147 dBm, Tracking & Navigation: -161 dBm
- Position Accuracy: 2, 2.5Meter
- Acceleration: <4g
- Navigation Update Rate:Â 5Hz
- Operating Temperature Range: -24 to 84°C
- Tracking Sensitivity: -161 DBM
- Co-Ordinate System:Â WGS-84
- Capture Time:Â 0.1s Average
- Avg Cold Start Time:Â 38s
- Warm Start Time: 35s
- Boot Time:Â 1S
- Maximum Altitude:Â 18000m
- Maximum Speed:Â 515 m/s
Features:
- Locate performance
- Super Bright LED
- compass on board
- 4-pin connector for only GPS use
- 1Hz (Default) Changed to 5Hz!
- Permanent Configuration Retention
- Output GGA, GSA, and RMC frames
- 38400 bps (Default) Changed to 115200bps!
- 4-pin connector for compass only use
- The 6-pin connector for EZ connects to MEGA BLACK
- NEO 7M GPS Module can use both 4 pins at once.
- Backplane with Standard Mk style mounting holes 45mm X 45mm
- These are Pre-configured, Flashed with the correct settings, and tested. To make them Plug and Play.
Package Included:
1 x NEO 7M GPS Module NEO 7M GPS With Compass for APM 2.6/2.8 and Pixhawk 2.4.6/2.4.8








Raspberry Pi 5 Single Board Computer with 2.4GHz quad-core, 64-bit Arm Cortex-A76, and LPDDR4X-4267 SDRAM 16GB
55mm Copper Crocodile Clip Copper Insulated Crocodile Clip 55mm Insulated Clip Opening 10mm For Banana Plug 4mm High-Quality Crocodile Clip - White
Ender 3 V3 KE 3D Printer
Radiolink R6DS RC Receiver R6DS 2.4GHz RC Receiver 6/10 Channels SBUS/PWM/PPM for Drone Airplane Fixed Wing AT9S/AT9S Pro/AT10/AT10II Transmitter RX
Raspberry Pi Zero 2WH Raspberry Pi Zero 2W with Headers and Quad-Core CPU, Wi-fi, Bluetooth 4.2, BLE, Onboard Antenna
5400mAh Lipo Battery 14.8V 5400mAh 4S 30C Lithium Polymer Battery
DRV8825 Stepper Motor Driver Module 4-Layer with Mini Heat Sink for 3D Printer
Raspberry Pi Pico 2 W with 2.4GHz 802.11n Wireless LAN and Bluetooth 5.2 RP2350 Pico 2W Wireless Microcontroller Board
Raspberry Pi Compute Module 4 - CM4102008- 2GB RAM - 8GB eMMC - Wireless
15-22 Inch Propeller Adapter Quick Release Prop Adapter CW&CCW For 15-22 Inch Prop / M3 15mm Hole Motor (Without Mounting Plate)
Raspberry Pi Zero V1.3 Single-Core CPU Support Micro USB Power, Camera And Micro SD Card
SG90 Servo Motor 9g Mini/Micro Servo Motor 360 Degrees
L9110 Fan Module Fire Fighting Robot Fan Drive Module for Arduino
Sipeed Lichee Nano Linux Development Board 16M Flash Version Nano Linux Development Board
100k ohm Rotatry Potentiometer 3 Terminals Rotary Shaft Potentiometer Variable Resistor Linear Taper Rotary Potentiometer Pots
Bambu Lab TPU 95A HF 1.75mm 3D Filament Black
5mm Yellow LED Light Emitting Diode (Pack of 5)
Reviews
There are no reviews yet.