Description
Description:
The BeagleBone Black (BBONE-BLACK-4G) is a low-cost, high-expansion-focused BeagleBoard using a low-cost Sitaraâ„¢ AM3358 ARM® Cortexâ„¢-A8 processor from Texas Instruments. The BBONE-BLACK-4G features TI’s Sitaraâ„¢ AM3358AZCZ100 microprocessor, which is based on ARM®Cortexâ„¢-A8 core with enhanced image, graphics processing, peripherals and industrial interface options such as EtherCAT and PROFIBUS.
The board is equipped with 256Mb x16 DDR3L 4Gb (512MB) SDRAM, 32KB EEPROM, and 4GB embedded MMC (eMMC) Flash as the default boot source. The board is also populated with a single microSD connector to act as a secondary boot source for the board and, if selected as such, can be the primary boot source. The BeagleBone Black supports four boot modes, including eMMC boot, microSD boot, serial boot, and USB boot. A switch is provided to allow switching between the modes.
Specifications:
- Processor:
- TI Sitara AM3358AZCZ100, 1GHz, 2000 MIPS
- 1 GHz ARM®Cortex™-A8
- SGX530 Graphics Engine
- Programmable Real-Time Unit Subsystem
- Memory:
- SDRAM: 512MB DDR3L 800MHZ
- Onboard Flash: 4GB, 8bit Embedded MMC (eMMC)
- SD/MMC Connector for microSD:
- Power management:Â TPS65217C PMIC is used along with a separate LDO to provide power to the system
- Debug Support:Â Optional Onboard 20-pin CTI JTAG, Serial Header
- Power Source:
- miniUSB USB or DC Jack
- 5VDC External Via Expansion Header
- Connectivity:
- High-speed USB 2.0 Client port: Access to USB0, Client mode via mini USB
- High-Speed USB 2.0 Host port: Access to USB1, Type A Socket, 500mA LS/FS/HS
- Serial Port: UART0 access via 6 pins 3.3V TTL Header. Header is populated
- 10/100M Ethernet (RJ45)
- User Input / Output:
- Reset Button
- Boot Button
- Power Button
- LED power indicator
- 4 user-configurable LEDs
- Video/Audio Interfaces:
- HDMI D-type interface
- LCD interface
- Stereo audio over HDMI interface
- Expansion Interfaces:
- LCD, UART, eMMC
- ADC, I2C, SPI, PWM
Useful Link:
Package Included:
- 1 x BeagleBone Black Board
- 1 x Mini USB to USB Type-A Cable
- 1 x Quick Start Guide





YRRC 30A ESC YRRC 30A 2-4S Blheli_S DSHOT600 OPTO Brushless ESC for RC Drone FPV Racing
10.1" LCD Display IPS LCD Screen 1280×800 With Driver Board Kit Raspberry Pi Compatible With and All Version of Pi
NEO 7M GPS Module NEO 7M GPS With Compass for APM 2.6/2.8 and Pixhawk 2.4.6/2.4.8
10uF 200V Electrolytic Capacitor 10uF 200V Aluminum Radial Capacitor 10uF Radial Leaded Capacitor Reliable 10uF 200V Capacitor For Your Projects, Pack Of 5
10K Ohm Resistor, 10K Ohm Resistance 1/4W Power Rating 5%
NEMA17 Stepper Motor Cable Pure Copper 1000 mm Cable with Connector for NEMA17 Stepper Motor
Raspberry Pi Pico Microcontroller Development Board with Versatile Board Built Using RP2040 Chip
GA12-N20-12V 1000 RPM ALL METAL GEAR MICRO DC MOTOR WITH PRECIOUS METAL BRUSH
Sky Blue PLA PRO+
Nano Uno Expansion Board Nano Uno Multipurpose Expansion Board Multipurpose Expansion Module
SP Racing F3 Flight Controller ACRO Flight Controller F3 Flight Controller For FPV Racing Drones High Performance F3 Flight Controller ACRO Version SP Racing F3 ACRO Flight Controller For RC Drones
Raspberry Pi Zero V1.3 Single-Core CPU Support Micro USB Power, Camera And Micro SD Card
MY1020Z E-Bike Motor 24V 450W Brushed Motor 3000RPM DC Motor High-Performance 24V 450W DC Brushed E-Bike Motor
Female Deans T-Plug Connector Deans Connector For RC LiPo Battery T-Plug Connector For ESC High-Quality Deans Connector For RC Applications
Raspberry Pi Pico H RP2040 Microcontroller Chip Development Board
Raspberry Pi Pico 2 Pi RP2350 Microcontroller Pico 2 Powerful Dual-Core Arm Cortex-M33 Microcontroller RP2350 Based Board
1S 18650 3.7V BMS Board 1S 18650 3.7V lithium battery protection plate 6 MOS
1045 Propeller 10*4.5 inch Propeller 10x4.5 CW CCW Propeller Pair for Quadcopter
Reviews
There are no reviews yet.