Description
Description:
The BeagleBone Black (BBONE-BLACK-4G) is a low-cost, high-expansion-focused BeagleBoard using a low-cost Sitaraâ„¢ AM3358 ARM® Cortexâ„¢-A8 processor from Texas Instruments. The BBONE-BLACK-4G features TI’s Sitaraâ„¢ AM3358AZCZ100 microprocessor, which is based on ARM®Cortexâ„¢-A8 core with enhanced image, graphics processing, peripherals and industrial interface options such as EtherCAT and PROFIBUS.
The board is equipped with 256Mb x16 DDR3L 4Gb (512MB) SDRAM, 32KB EEPROM, and 4GB embedded MMC (eMMC) Flash as the default boot source. The board is also populated with a single microSD connector to act as a secondary boot source for the board and, if selected as such, can be the primary boot source. The BeagleBone Black supports four boot modes, including eMMC boot, microSD boot, serial boot, and USB boot. A switch is provided to allow switching between the modes.
Specifications:
- Processor:
- TI Sitara AM3358AZCZ100, 1GHz, 2000 MIPS
- 1 GHz ARM®Cortex™-A8
- SGX530 Graphics Engine
- Programmable Real-Time Unit Subsystem
- Memory:
- SDRAM: 512MB DDR3L 800MHZ
- Onboard Flash: 4GB, 8bit Embedded MMC (eMMC)
- SD/MMC Connector for microSD:
- Power management:Â TPS65217C PMIC is used along with a separate LDO to provide power to the system
- Debug Support:Â Optional Onboard 20-pin CTI JTAG, Serial Header
- Power Source:
- miniUSB USB or DC Jack
- 5VDC External Via Expansion Header
- Connectivity:
- High-speed USB 2.0 Client port: Access to USB0, Client mode via mini USB
- High-Speed USB 2.0 Host port: Access to USB1, Type A Socket, 500mA LS/FS/HS
- Serial Port: UART0 access via 6 pins 3.3V TTL Header. Header is populated
- 10/100M Ethernet (RJ45)
- User Input / Output:
- Reset Button
- Boot Button
- Power Button
- LED power indicator
- 4 user-configurable LEDs
- Video/Audio Interfaces:
- HDMI D-type interface
- LCD interface
- Stereo audio over HDMI interface
- Expansion Interfaces:
- LCD, UART, eMMC
- ADC, I2C, SPI, PWM
Useful Link:
Package Included:
- 1 x BeagleBone Black Board
- 1 x Mini USB to USB Type-A Cable
- 1 x Quick Start Guide





5010 360KV Drone Motor High Torque 5010 Brushless Motor High Performance Drone Motor Heavy Lift Drone Motor For FPV and Racing Drones
SafeConnect XT60 Male Connector With 14AWG Silicon Wire 10cm XT60 Male Connector For Battery Charging High-Quality XT60 Male Connector For RC Applications
Radiolink Divit Digital Video Transmission Adapter Board for DJI DIGITAL FPV SYSTEM, DJI O3 Air Unit, Caddx Walksnail Avatar HD System, compatible with Mini Pix, Crossflight, PIXHAWK
Radiolink R8FG RC Receiver 2.4Ghz R8FG V2.1 3ms Latency 8 Channels Gyro Receiver with Voltage Telemetry, Waterproof RX for RC Crawler Car Boat Radio Controller RC8X/RC6GS V3/RC4GS V3/RC6GS V2/RC4GS V2/T8FB/T8S
DC Motor Fan Blade 3-Wing Fan For Toy Motor Round Shape - Yellow
DC Motor Fan Blade 3-Wing Fan For Toy Motor Round Sape - Yellow Transparent
ATTINY85 Development Board ATTINY85 USB Development Board ATTINY85 Module
20x2 LCD Display With Green Backlight 20 Character x 2 Lines Compact LCD Display For Electronic Projects
Raspberry Pi IR Camera Module 500W Night Vision Camera Module 5MP Raspberry Pi Camera Module Infrared Camera Module for Raspberry Pi 4/3/2/1/Zero/W/2W
SMD UNO R3 Arduino Compatible ATmega328 Board UNO R3 SMD Development Board CH340G SMD UNO Board
SM 2 Pin Plug Female Connector Adapter with 150 mm Electrical Cable Wire for LED Light
Radiolink R9DS RC Receiver 10 Channels 2.4GHz RC Receiver SBUS/PWM Long Range Control for Airplane/Car/Multirotors, Compatible with Transmitter AT9/AT9S/AT9S Pro AT10II/AT10
Reviews
There are no reviews yet.