Description
Description:
The BeagleBone Black (BBONE-BLACK-4G) is a low-cost, high-expansion-focused BeagleBoard using a low-cost Sitaraâ„¢ AM3358 ARM® Cortexâ„¢-A8 processor from Texas Instruments. The BBONE-BLACK-4G features TI’s Sitaraâ„¢ AM3358AZCZ100 microprocessor, which is based on ARM®Cortexâ„¢-A8 core with enhanced image, graphics processing, peripherals and industrial interface options such as EtherCAT and PROFIBUS.
The board is equipped with 256Mb x16 DDR3L 4Gb (512MB) SDRAM, 32KB EEPROM, and 4GB embedded MMC (eMMC) Flash as the default boot source. The board is also populated with a single microSD connector to act as a secondary boot source for the board and, if selected as such, can be the primary boot source. The BeagleBone Black supports four boot modes, including eMMC boot, microSD boot, serial boot, and USB boot. A switch is provided to allow switching between the modes.
Specifications:
- Processor:
- TI Sitara AM3358AZCZ100, 1GHz, 2000 MIPS
- 1 GHz ARM®Cortex™-A8
- SGX530 Graphics Engine
- Programmable Real-Time Unit Subsystem
- Memory:
- SDRAM: 512MB DDR3L 800MHZ
- Onboard Flash: 4GB, 8bit Embedded MMC (eMMC)
- SD/MMC Connector for microSD:
- Power management:Â TPS65217C PMIC is used along with a separate LDO to provide power to the system
- Debug Support:Â Optional Onboard 20-pin CTI JTAG, Serial Header
- Power Source:
- miniUSB USB or DC Jack
- 5VDC External Via Expansion Header
- Connectivity:
- High-speed USB 2.0 Client port: Access to USB0, Client mode via mini USB
- High-Speed USB 2.0 Host port: Access to USB1, Type A Socket, 500mA LS/FS/HS
- Serial Port: UART0 access via 6 pins 3.3V TTL Header. Header is populated
- 10/100M Ethernet (RJ45)
- User Input / Output:
- Reset Button
- Boot Button
- Power Button
- LED power indicator
- 4 user-configurable LEDs
- Video/Audio Interfaces:
- HDMI D-type interface
- LCD interface
- Stereo audio over HDMI interface
- Expansion Interfaces:
- LCD, UART, eMMC
- ADC, I2C, SPI, PWM
Useful Link:
Package Included:
- 1 x BeagleBone Black Board
- 1 x Mini USB to USB Type-A Cable
- 1 x Quick Start Guide







12V 100 RPM Geared Motor Johnson DC Gearbox Motor High-Torque 100 RPM Geared Motor High-Performance 100 RPM DC Geared Motor
Radiolink R8FM RC Receiver R8FM 8 Channels 2.4GHz Micro RC Receiver SBUS/PPM for Mini FPV Racing Drone, Quad, Aircraft T8S/T8FB Transmitter
DYS D2826-10 Brushless Drone Motor 1400KV Outrunner Brushless Motor High-Performance Drone Motor Efficient Brushless Motor For FPV Drones For Quadcopters And Drone Applications (Original)
15A Test Lead Wire 4mm Banana Plug And Alligator/Crocodile Clip 15A Multimeter DIY Test Wires With Secure Connections - Green
4 USB Fast Charging Module Board 12V24V to QC2.0 QC3.0 Step Down Power Supply Module 12V 24V
B10 Buzzer DC 5V 2 Terminals Electronic Continuous Sound Buzzer
Y Type Servo Extension Wire 1JR Male To 2 Futaba Female Y Type Servo Extension Wire - 300mm
Waveshare 4 inch LCD 10.16cm RPi LCD (A) 480x320 Raspberry Pi Display
Degson 5mm Pitch PCB Terminal Block Degson 3 Pin 5mm PCB Terminal Block PCB Mount Screw Terminal Block Terminal Blocks Connectors High Quality
Bambu Lab A1 3D Printer
5MP 1080P Video Camera Module for Raspberry Pi 4 Model B, Pi 3 b+, Pi Zero W Camera Holder Case
Tiger Orange PLA PRO+
24V 6S 15A BMS Board BMS 6S 15A 24V Battery Protection Board For 18650 Li-ion Battery Cell Protection Board For 18650 Lithium Battery
Daisy White PLA PRO+
Reviews
There are no reviews yet.