Description
Description:
SIM7070GÂ is a telecommunication HAT for Raspberry Pi which supports global bands of NB-IoT, Cat-M, and GPRS, as well as GNSS positioning function. Due to its advantages like small size, low delay, and wide coverage, SIM7070G is the ideal choice for IoT applications such as intelligent instruments, asset tracking, remote monitoring, e-health, and so on.
Compared to SIM7080G, this module also supports GPRS (2G); compared to SIM7000C/E, it is more generic due to the global bands support.
Specifications:
| NB-IOT/CAT-M/2G | |
|---|---|
| Band | NB-IoT: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B28/B66/B71/B85 |
| Cat-M: B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26/B27/B28/B66/B85 | |
| GSM/GPRS/EDGE: 850/900/1800/1900MHz | |
| Data rate | NB-IoT: 136Kbps(DL)/150Kbps(UL) |
| Cat-M: 589Kbps(DL)/1119Kbps(UL) | |
| GPRS: 85.6Kbps(DL)/85.6Kbps(UL) | |
| EDGE: 236.8Kbps(DL)/236.8Kbps(UL) | |
| SIM card support | NB-IoT/Cat-M/2G card (1.8V SIM card ONLY) |
| Applicable region | global |
| GNSS | |
| Satellite systems | GPS, BeiDou, GLONASS, Galileo |
| Receiver type | 16-channel |
| C/A Code | |
| Band | GPS L1: 1575.42 ± 1.023MHz |
| GLONASS L1: 1598.0625 ~ 1605.375MHz | |
| BDS B1: 1559.052 ~ 1591.788MHz | |
| Galileo L1: 1575.42 ± 1.023MHz | |
| Data format | NMEA-0183 |
| Antenna | Active antenna |
| Other | |
| Power supply | 5V |
| Operating voltage | 5V / 3.3V (configured via 0Ω resistor) |
| Current consumption | about 41mA (idle mode) |
| Operating temperature | -40°C ~ 85°C |
| Storage temperature | -45°C ~ 90°C |
| Dimensions | 30.50mm × 65.00mm |
Features:
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
- SIM7070G supports communication protocols such as TCP/UDP/HTTP/HTTPS/TLS/DTLS/PING/LWM2M/COAP/MQTT
- SIM7070G supports GNSS positioning (GPS, BeiDou, GLONASS, Galileo)
- Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
- Breakout UART control pins, to connect with host boards like Arduino/STM32
- SIM card slot supports ONLY 1.8V SIM card (3V SIM card is not available)
- 2x LED indicators, easy to monitor the working status
- Baudrate: 300~3686400 bps
- Common baud rate auto-negotiation: 9600/19200/38400/57600/115200 bps
- SIM7070G comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
Package Included:
1 x Waveshare SIM7070G NB-IoT / Cat-M / GPRS / GNSS HAT for Raspberry Pi, Global Band Support
PRO Mini Atmega328 Development Board 5V/16MHz compatible with arduino IDE 
3PI miniQ N20 Micro Motor Mount Set 12mm DC Gear Motor Mounting Bracket Toy Car Accessories 
2x40 Pins Male Header 2x40 Pin 2.54mm Pitch Male Berg Strip-Right Angle 
Radiolink R6DSM RC Receiver R6DSM 2.4Ghz 10 Channels Micro RC Receiver SBUS/PPM for Mini FPV Racing Drone, Quadcopters Aircraft, AT9S AT9S Pro/AT10/AT10II Transmitter 
T Plug Deans Connector XT Plug T Plug Deans Connector For Esc Battery Male Female With Seath Housing 
Raspberry Pi 4 Model-B 1GB LPDDR4 SDRAM Raspberry PI 4B SBC IOT Board - Broadcom 1.5GHZ A72 Processor 
YRRC 30A ESC YRRC 30A 2-4S Blheli_S DSHOT600 OPTO Brushless ESC for RC Drone FPV Racing 
X7 3DR Radio Telemetry Open Source 5KM 1000mW 1W 915MHz for APM Pixhawk Flight Controller - 915MHz 
USB Mini Discharge Load Resistor 2A/1A USB Mini Discharge Load USB Mini Discharge Load Resistor 2A/1A With Switch 1A Green led, 2A Red led Integrated Circuits 
DC Motor Fan Blade 3-Wing Fan For Toy Motor Round Shape - Green 
Raspberry Pi Compute Module 4 - CM4001008 - 1GB RAM 8GB eMMC No Wireless
Reviews
There are no reviews yet.