Description
Description:
SIM7070GÂ is a telecommunication HAT for Raspberry Pi which supports global bands of NB-IoT, Cat-M, and GPRS, as well as GNSS positioning function. Due to its advantages like small size, low delay, and wide coverage, SIM7070G is the ideal choice for IoT applications such as intelligent instruments, asset tracking, remote monitoring, e-health, and so on.
Compared to SIM7080G, this module also supports GPRS (2G); compared to SIM7000C/E, it is more generic due to the global bands support.
Specifications:
| NB-IOT/CAT-M/2G | |
|---|---|
| Band | NB-IoT: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B28/B66/B71/B85 |
| Cat-M: B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26/B27/B28/B66/B85 | |
| GSM/GPRS/EDGE: 850/900/1800/1900MHz | |
| Data rate | NB-IoT: 136Kbps(DL)/150Kbps(UL) |
| Cat-M: 589Kbps(DL)/1119Kbps(UL) | |
| GPRS: 85.6Kbps(DL)/85.6Kbps(UL) | |
| EDGE: 236.8Kbps(DL)/236.8Kbps(UL) | |
| SIM card support | NB-IoT/Cat-M/2G card (1.8V SIM card ONLY) |
| Applicable region | global |
| GNSS | |
| Satellite systems | GPS, BeiDou, GLONASS, Galileo |
| Receiver type | 16-channel |
| C/A Code | |
| Band | GPS L1: 1575.42 ± 1.023MHz |
| GLONASS L1: 1598.0625 ~ 1605.375MHz | |
| BDS B1: 1559.052 ~ 1591.788MHz | |
| Galileo L1: 1575.42 ± 1.023MHz | |
| Data format | NMEA-0183 |
| Antenna | Active antenna |
| Other | |
| Power supply | 5V |
| Operating voltage | 5V / 3.3V (configured via 0Ω resistor) |
| Current consumption | about 41mA (idle mode) |
| Operating temperature | -40°C ~ 85°C |
| Storage temperature | -45°C ~ 90°C |
| Dimensions | 30.50mm × 65.00mm |
Features:
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
- SIM7070G supports communication protocols such as TCP/UDP/HTTP/HTTPS/TLS/DTLS/PING/LWM2M/COAP/MQTT
- SIM7070G supports GNSS positioning (GPS, BeiDou, GLONASS, Galileo)
- Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
- Breakout UART control pins, to connect with host boards like Arduino/STM32
- SIM card slot supports ONLY 1.8V SIM card (3V SIM card is not available)
- 2x LED indicators, easy to monitor the working status
- Baudrate: 300~3686400 bps
- Common baud rate auto-negotiation: 9600/19200/38400/57600/115200 bps
- SIM7070G comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
Package Included:
1 x Waveshare SIM7070G NB-IoT / Cat-M / GPRS / GNSS HAT for Raspberry Pi, Global Band Support
Waveshare 2.8inch Resistive Touch LCD, 320x240, Raspberry Pi/Arduino 
Waveshare 1.8inch LCD Display Module For Raspberry Pi Pico 65K RGB Colors 160×128 Pixels TFT Screen SPI Interface 
Radiolink R4FGM RC Receiver R4FGM 2.4Ghz 4 Channels Tiny RC Gyro Receiver For Mini RC Cars 1/28 and Boats, Long Control Distance for Radio RC8X RC4GS V3/RC6GS V3/T8S/T8FB 
Y Type Servo Extension Wire 1JR Male To 2 Futaba Female Y Type Servo Extension Wire - 30cm 
Natural White PLA PRO+ 
Nextion NX3224T028 2.8" Basic HMI Touch Display 2.8inch HMI Display Basic Series HMI Touchscreen Display 2.8inch Touch Display 
1400KV BLDC Motor A2212 10T 1400KV Brushless Motor for Drone 
MG995 180-Degree Servo Motor Continuous rotation 360 Metal Gear Servo Motor High-Torque MG995 Servo Motor 
Radiolink R9DS RC Receiver 10 Channels 2.4GHz RC Receiver SBUS/PWM Long Range Control for Airplane/Car/Multirotors, Compatible with Transmitter AT9/AT9S/AT9S Pro AT10II/AT10 
Raspberry Pi Heatsink Aluminum & Ceramic Heatsink RPi Cooling Kit 2-in-1 Heatsink Set High-Performance Heatsink for Raspberry Pi 2/3/4/B/B+ 
iMAX B6AC Charger iMAX B6 LCD Screen Digital RC Lipo NiMh Battery Balance Charger B6AC Lipo Charging XT60/T Plug Adaptor Board 2-6S 
4.8 kg-cm NEMA17 Stepper Motor NEMA17 4.8 kg-cm Stepper Motor with Detachable 72 CM Cable 
JoyStick Shield Module Joystick Shield Gamepad Analog Keyboard and Mouse Function for Arduino FR4 Wireless Bluetooth DIY Shield V1 Expansion Board Red For DIY Projects Simulated Keyboard Mouse RF Transceiver Module
Reviews
There are no reviews yet.