Description
Description:
SIM7070GÂ is a telecommunication HAT for Raspberry Pi which supports global bands of NB-IoT, Cat-M, and GPRS, as well as GNSS positioning function. Due to its advantages like small size, low delay, and wide coverage, SIM7070G is the ideal choice for IoT applications such as intelligent instruments, asset tracking, remote monitoring, e-health, and so on.
Compared to SIM7080G, this module also supports GPRS (2G); compared to SIM7000C/E, it is more generic due to the global bands support.
Specifications:
| NB-IOT/CAT-M/2G | |
|---|---|
| Band | NB-IoT: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B28/B66/B71/B85 |
| Cat-M: B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26/B27/B28/B66/B85 | |
| GSM/GPRS/EDGE: 850/900/1800/1900MHz | |
| Data rate | NB-IoT: 136Kbps(DL)/150Kbps(UL) |
| Cat-M: 589Kbps(DL)/1119Kbps(UL) | |
| GPRS: 85.6Kbps(DL)/85.6Kbps(UL) | |
| EDGE: 236.8Kbps(DL)/236.8Kbps(UL) | |
| SIM card support | NB-IoT/Cat-M/2G card (1.8V SIM card ONLY) |
| Applicable region | global |
| GNSS | |
| Satellite systems | GPS, BeiDou, GLONASS, Galileo |
| Receiver type | 16-channel |
| C/A Code | |
| Band | GPS L1: 1575.42 ± 1.023MHz |
| GLONASS L1: 1598.0625 ~ 1605.375MHz | |
| BDS B1: 1559.052 ~ 1591.788MHz | |
| Galileo L1: 1575.42 ± 1.023MHz | |
| Data format | NMEA-0183 |
| Antenna | Active antenna |
| Other | |
| Power supply | 5V |
| Operating voltage | 5V / 3.3V (configured via 0Ω resistor) |
| Current consumption | about 41mA (idle mode) |
| Operating temperature | -40°C ~ 85°C |
| Storage temperature | -45°C ~ 90°C |
| Dimensions | 30.50mm × 65.00mm |
Features:
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
- SIM7070G supports communication protocols such as TCP/UDP/HTTP/HTTPS/TLS/DTLS/PING/LWM2M/COAP/MQTT
- SIM7070G supports GNSS positioning (GPS, BeiDou, GLONASS, Galileo)
- Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
- Breakout UART control pins, to connect with host boards like Arduino/STM32
- SIM card slot supports ONLY 1.8V SIM card (3V SIM card is not available)
- 2x LED indicators, easy to monitor the working status
- Baudrate: 300~3686400 bps
- Common baud rate auto-negotiation: 9600/19200/38400/57600/115200 bps
- SIM7070G comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
Package Included:
1 x Waveshare SIM7070G NB-IoT / Cat-M / GPRS / GNSS HAT for Raspberry Pi, Global Band Support
iMAX B6 Charger iMAX B6 80W 6A Charger/Discharger 1-6 Cells 
A4988 Stepper Motor Driver 3D Printer Reprap Stepper Driver A4988 Motor Driver Module With Heat Sinks For Arduino And Raspberry Pi 
M8N GPS Compass Module GPS Module With Built-in Electronic Compass High Precision M8N GPS and Electronic Compass Module For Accurate Positioning and Navigation 
Pro Micro Atmega32U4 Development Board 5V 16M Mini Development Board Pro Micro 5V 16M Mini Leonardo Microcontroller Development 
Nextion NX3224T028 2.8" Basic HMI Touch Display 2.8inch HMI Display Basic Series HMI Touchscreen Display 2.8inch Touch Display 
Waveshare 4 inch LCD 10.16cm RPi LCD (A) 480x320 Raspberry Pi Display 
Royal Blue PLA PRO+ 
T Motor AIR 40A ESC AIR 40A 2-6S Multi-Rotor UAV Drone ESC
Reviews
There are no reviews yet.