Description
Description:
The Raspberry Pi 4 is the latest product in the Raspberry Pi range, boasting an updated 64-bit quad-core processor running at 1.4GHz with built-in metal heat-sink, USB 3 ports, dual-band 2.4GHz, and 5GHz wireless LAN, faster (300 Mbps) Ethernet, and PoE capability via a separate PoE HAT.
Raspberry Pi4 B is upgraded with the Latest High-Performance Quad-Core 64-bit Broad-com 2711, Cortex A72 processor clocked at 1.5GHz speed. Which is designed to use 20% less power or offer 90% greater performance than its old version. Hardware upgrade on Pi4 developed for faster performance not only in the loading time with all-new 1GB/2GB and 4GB LPDDR4 SDRAM variants but also in connectivity with Dual-band 2.4GHz and 5GHz, 802.11 b/g/n/ac wireless LAN and PoE capability via a separate PoE HAT. In addition to USB 3.0, improves the transfer speed by 10x than USB 2.0 to provide you significantly faster true Gigabit internet experience.
Now you can enjoy 4K video using Pi 4 as video performance on Pi 4 B is also upgraded with On-Board Dual-display support at resolutions up to 4K via a pair of micro-HDMI ports, which supports H 265 Decode (4Kp60), H.264, and MPEG-4 decode (1080p60). The latest Bluetooth 5.0 technology makes IoT solutions better with 2 x Speed, 4 x Range, and 8 x Data transfer speed, having such a faster and long-distance connectivity, you will experience peripheral Bluetooth connectivity on the next level than before.
Specifications:
| Model | Raspberry Pi 4 Model-B |
| Processor | Broadcom BCM2711, quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz |
| RAM Memory | Â 2GB SDRAM |
| Connectivity | 2 × USB 2.0 Ports 2 × USB 3.0 Ports 2.4 GHz and 5.0 GHz IEEE 802.11b/g/n/ac wireless LAN, BLE Gigabit Ethernet Bluetooth 5.0 |
| Operating Power | 5V 3A DC via GPIO Header 5V 3A DC via USB Type-C Connector Power Over Ethernet (PoE)–Enabled (requires separate PoE HAT) |
| GPIO | (Fully backwards-compatible with previous boards) Standard 40-pin GPIO Header |
| Multimedia | H.264 (1080p 60 decode, 1080p 30 encode); H.265 (4Kp60 decode); Open GL ES, 3.0 Graphics |
| Video and Sound | 2 × micro HDMI ports (up to 4Kp60 supported) 2-Lane MIPI CSI Camera Port 2-Lane MIPI DSI Display Port 4-Pole Stereo Audio and Composite Video Port |
| Clock Speed | 1.5 GHz |
| Micro-SD Card Slot | Yes (FAT32 format), support maximum 32G Micro SD Card Memory Features |
| Operating Temperature Range | 0ºC to 50ºC |
Features:
- Faster processing:Â With one of the latest Broadcom 2711, Quad-Core Cortex A72 (ARM V8-A) 64-bit SoC Clocked at 1.5GHz processor improved power consumptions and thermals on the Pi 4+B means that the CPU on the BCM2837 SoC can now run at 1.5GHz, a 20% increase on the previous Pi 3 model (which ran at 1.2GHz).
- Faster wireless:Â A significant change on the Pi 4 B compared to the previous Pi 3 models is the inclusion of a new faster, dual-band wireless chip with 802.11 b/g/n/ac wireless LAN.
- Enhanced Ethernet Connectivity:Â The Pi 4 B has significantly faster-wired networking with USB 3.0 technology, thanks to an upgraded USB/LAN chip, and you should see speeds that are 10x faster than on previous models of the Pi.
Package Included:
1 x Raspberry Pi 4 Model-B 2GB SDRAM Raspberry PI 4B SBC IOT Board – Broadcom 1.5GHZ A72 Processor







1200TVL CMOS FPV Camera High Definition 2.1mm Lens Camera RC Drone Camera Multi-Copter Camera for FPV Racing RC Drone FPV Camera For Aerial Photography And Videography
USB Type-A Male PCB R/A Connector USB 4-Pin Male Connector USB A-Type Plug Male PCB Mount Right Angle
16x2 I2C LCD IIC/I2C 1602 LCD Module Yellow Backlight
Bambu Lab A1 3D Printer
Push Button Cap 12x12x7.3 mm Round Cap For Square Tactile Switch - Black
15A Test Lead Wire 4mm Banana Plug And Alligator/Crocodile Clip 15A Multimeter DIY Test Wires With Secure Connections - Blue
JX Servo PDI-HV2107MG Servo Motor 21g High Torque Digital Standard Servo For RC Model
MY1020Z E-Bike Motor 24V 450W Brushed Motor 3000RPM DC Motor High-Performance 24V 450W DC Brushed E-Bike Motor
0.8mm 3D Printer Nozzle Head M7 Thread Replacement for MK10 1.75mm Extruder Print
5x6 18650 Battery Spacer Holder With 18.5mm Bore Battery Holder Lithium-ion Battery Holder Rechargeable Battery Holder Plastic Holder For DIY Battery Pack
Arduino Uno Prototype Shield Protoshield Expansion Board Module With Mini Breadboard Compatible With Arduino
Creality 42-40 Stepper Motor Creality Stepper Motor High-Torque 42-40 Stepper Motor Precision Stepper Motor For 3D Printers And CNC Machines
Reviews
There are no reviews yet.