Description
Description:
Pseudo random algorithm FHSS communication technology makes R6FG with good performance and excellent anti-interference. Radiolink R6FG RC Receiver with Gyro and Normal modes, gyro mode for professional on/off road rc car vehicles, like drifting car. The gyro sensitivity can be adjusted by VR knob switch. With a compact case, small size, light weight for vehicle’s box, outstanding control range up to 1300 feet(400 meters), Radiolink R6FG RC Receiver is compatible with Radiolink’s radio: RC4GS V3/RC4GS V2/RC4GS/RC6GS V3/RC6GS V2/RC6GS/T8FB/T8S.
Specifications:
- Channel: 6
- Model: Car/Boat
- Control Distance: more than 400m
- Spread Spectrum: fhss
- Antenna Length: 200mm
- Working Current: 30mA
- Working Voltage: 3~15V DC
- RF power: <10dbm
- Channel Resolution: 4096
- Size: 3*2*1.3cm
- Weight: 6g
Features:
- Excellent Anti-interference:Â With pseudo random algorithm FHSS communication technology, which makes Radiolink R6FG RC Receiver with stable signal and outstanding ground control range over 1300 feet (400 meters).
- Integrated Gyro:Â Radiolink R6FG RC Receiver has built-in gyro can keep the vehicle in a straight line, and Gyro sensitivity can be adjusted by transmitter, which fits for drifting and on-road cars.
- Superb Fast Response:Â Radiolink R6FG RC Receiver has high resolution ratio of 4096, stable signal output to provide a fast response for all channels, suitable for rc rock crawler, truck, buggy, drifting, etc.
- Press to Bind:Â No need bind plug and any radio setting, only press bind button for 1 second after power up radio and receiver.
- Anti-polarity Protection:Â Radiolink R6FG RC Receiver with reverse polarity protection, not damage the receiver even you insert wrong polarity. 3.0-15v DC support high voltage servo.
Package Included:
1 x Radiolink R6FG RC Receiver







Candy Red PLA PRO+
1.8 inch LCD Display Module ST7735 Driver TFT 128x160 4 IO LCD Display Arduino Compatible LCD Microcontroller Compatible LCD
DYS D2822 Brushless Motor D2822 1450KV Outrunner Brushless Drone Motor (Original)
Pixhawk PX4 Autopilot PIX2.4.8 Flight Controller Pixhawk 32-Bit Processor PX4 Autopilot Controller High Performance Autopilot For Drones and UAVs
15-22 Inch Propeller Adapter Quick Release Prop Adapter CW&CCW For 15-22 Inch Prop / M3 15mm Hole Motor (Without Mounting Plate)
Raspberry Pi 3B+ Starter Kit: Your All-in-One DIY Computer Pi 3B+ Starter Pack Ideal For Coding, Programming And More
Fly Sky FS-i6X 2.4GHz 6CH AFHDS 2A RC Transmitter With FS-iA10B 2.4GHz 10CH Receiver
1S 18650 3.7V BMS Board 1S 18650 3.7V lithium battery protection plate 6 MOS
220 Ohm Resistor, 220 Ohm Resistance 1/4W Power Rating 5%
SM 2 Pin Plug Male Connector Adapter with 150 mm Electrical Cable Wire for LED Light
USB to Micro USB Cable USB A Type to Micro USB B Type 1M Cable (Colour May Vary)
5mm White Led Light Emitting Diode (Pack of 5)
AD16-22TM(AD101-22TM) Temperature Indicator 22mm Round LED Temperature Indicator Light -20 to 199℃
Raspberry Pi 4 Model-B 4GB SDRAM Raspberry PI 4B SBC IOT Board - Broadcom 1.5GHZ A72 Processor
Raspberry Pi 5 Single Board Computer with 2.4GHz quad-core, 64-bit Arm Cortex-A76, and LPDDR4X-4267 SDRAM 16GB
Reviews
There are no reviews yet.