Description
Description:
The NE555 Timer IC is a highly stable device for generating accurate time delays or oscillation. Additional terminals are provided for triggering or resetting if desired. In the time delay mode of operation, the time is precisely controlled by one external resistor and capacitor. For astable operation as an oscillator, the free running frequency and duty cycle are accurately controlled with two external resistors and one capacitor. The NE555 Timer IC may be triggered and reset on falling waveforms, and the output circuit can source or sink up to 200mA or drive TTL circuits.
Specifications:
- Package/Case: DIP-8
- Minimum Supply Voltage: 4.5V
- Maximum Supply Voltage: 16V
- Product Series: NE555
- No. of Timers/Counters: 1
- Operating Temperature Range: 0 ~ 70°C
Features:
- Timing from microseconds through hours
- NE555 Timer IC operates in both astable and monostable modes
- NE555 Timer IC has adjustable duty cycle
- Output can source or sink 200 mA
- Output and supply TTL compatible
- NE555 Timer IC has normally on and normally off output
- NE555 Timer IC is available in 8-pin MSOP package
Pin Description:
| Pin | Name | Purpose |
| 1 | GND | Ground reference voltage, low level (0 V) |
| 2 | TRIG | The OUT pin goes high and a timing interval starts when this input falls below 1/2 of CTRL voltage (which is typically 1/3 Vcc, CTRL being 2/3 Vcc by default if CTRL is left open). In other words, OUT is high as long as the trigger low. The output of the timer totally depends upon the amplitude of the external trigger voltage applied to this pin. |
| 3 | OUT | This output is driven to approximately 1.7 V below +Vcc, or to GND. |
| 4 | RESET | A timing interval may be reset by driving this input to GND, but the timing does not begin again until RESET rises above approximately 0.7 volts. Overrides TRIG which overrides threshold. |
| 5 | CTRL | Provides “control” access to the internal voltage divider (by default, 2/3 Vcc). |
| 6 | THR | The timing (OUT high) interval ends when the voltage at threshold is greater than that at CTRL (2/3 Vcc if CTRL is open). |
| 7 | DIS | Open collector output which may discharge a capacitor between intervals. In phase with output. |
| 8 | VCC | Positive supply voltage, which is usually between 3 and 15 V depending on the variation. |
Package Included:
1 x NE555 Timer IC 555 DIP-8 General Purpose Single Bipolar Timer IC
Bambu Lab PETG-CF 3D Printer Filament 1.75mm Black 
Nema 23 Stepper Motor 10Kg-cm Nema 23 Stepper Motor 4-Wire Bipolar Stepper Motor 10Kg-cm Torque Stepper Motor With 5mm D Shaft For Robotics and 3D Printing Applications 
Official Raspberry Pi Zero Case Compatible with Raspberry Pi Zero, Zero W, Zero 2W 
16x2 I2C LCD IIC/I2C 1602 LCD Module Yellow Backlight 
Pixhawk I2C Splitter Pixhawk I2C Port Expand Board with Cable 
F450 / Q450 Quadcopter Frame – PCB Version Frame Kit with Integrated PCB – Made in INDIA 
Radiolink Cool 9030 ESC 90A Brushed (2-4S) Waterproof Built-in BEC 5A Selectable 5.5V/7.5V for RC Truck Crawlers Tanks Cars Bait Boats (XT60 Plug) 
NEO 7M GPS Module NEO 7M GPS With Compass for APM 2.6/2.8 and Pixhawk 2.4.6/2.4.8 
5MP 1080P Video Camera Module for Raspberry Pi 4 Model B, Pi 3 b+, Pi Zero W Camera Holder Case 
5MP Raspberry Pi Camera 1080p Adjustable Focus Camera OV5647 Focus Camera Raspberry Pi Camera Module Raspberry Pi 3/2 Model B/B+ 
Raspberry Pi Fisheye Camera 5MP Wide Angle Camera 160° 15-Pin Pi Camera MIPI Interface Raspberry Pi Camera for Raspberry Pi 2/3/4/B/B+/Zero/W/2W 
M8N GPS Compass Module GPS Module With Built-in Electronic Compass High Precision M8N GPS and Electronic Compass Module For Accurate Positioning and Navigation 
100X Microscope Lens C/CS Mount Microscope Lens Industrial Raspberry Pi HQ Camera Lens High Magnification Microscope Lens 
JX Servo PDI-933MG 3.3kg Large Torque Metal Gear Digital Servo For RC Models Accessories 
JX Servo PDI-HV2107MG Servo Motor 21g High Torque Digital Standard Servo For RC Model 
Single-Sided 2.54mm Hole Pitch FR-4 PCB Tinned BoardSingle-Sided 10x15cm Universal PCB
Reviews
There are no reviews yet.