Description
Description:
The Crowbits-Colour Sensor Module can recognize the color of the surface of the object.
Specifications:
- Interface Type: I2C
- Operating Voltage: 3.3V DC
How does it work?
The colour sensor is also called a color recognition sensor. It covers the corrected red, green, and blue filters on an independent photodiode, and then processes the output signal accordingly to identify the color signal. The color sensor has high reliability in detecting similar colors and tones. It achieves color detection by measuring the reflection ratio of the three primary colors that make up the color of the object.
Due to the extremely high precision of this color detection method, the sensor can accurately distinguish extremely similar colors, even different tones of the same color. Generally, the sensor has three light sources red, green, and blue. Three kinds of light are emitted by the same lens to be a target object reflected. The amount of light reflected or absorbed depends on the color of the object.
Bring the color object to be tested close to the sensor, illuminate the measured object with the lamp, and then reflect it to the sensor. After the sensor is identified and calculated, the value corresponding to the current color is output. Since the wavelength emitted by different colors is different, so different colors come back to the sensor after light, you will get different values. According to the feedback value, the specific color will be known after the operation.

How to use it?
The colour sensor module is connected to the main board downloads the detection program of the color sensor and outputs the result when the color is detected. It can also be used with the output display module to show the results on the display module.
Useful Link:
Package Included:
1 x ELECROW Crowbits-Colour Sensor Module RGB Colour Sensor Module Colour Detector Sensor Bring Colour To Your Robotics And IoT Projects






16x2 LCD Display Arduino Compatible 16*2 LCD 1602 LCD (Blue Backlight)
iMAX B6AC Charger iMAX B6 LCD Screen Digital RC Lipo NiMh Battery Balance Charger B6AC Lipo Charging XT60/T Plug Adaptor Board 2-6S
Degson 5mm Pitch PCB Terminal Block Degson 3 Pin 5mm PCB Terminal Block PCB Mount Screw Terminal Block Terminal Blocks Connectors High Quality
55mm Copper Crocodile Clip Copper Insulated Crocodile Clip 55mm Insulated Clip Opening 10mm For Banana Plug 4mm High-Quality Crocodile Clip - White
2.4 Inch TFT LCD Display RGB 240x320 Resolution SPI interface Color LCD Serial Port Module Touchless Panel Module For Arduino And Raspberry Pi
7400 IC 74LS00 Quad 2 Input NAND Gate IC DIP-14
18650 Li-ion Battery Charger Boost Module Reliable Type-C To 3S 12.6V Li-ion Charger Module With Short Circuit Protection
18650 Battery Shield 2 x 18650 Lithium Battery Shield V8 Mobile Power Expansion Board Module 5V/3A 3V/1A Micro USB for Arduino ESP32 ESP8266
Reviews
There are no reviews yet.