Description
Description:
This is a YF-G1 Water Flow Sensor. The YF-G1 Water Flow Sensor is mainly made of a plastic body, the rotor assembly and a Hall flow sensor. It has a water heater which is mounted on the end, for detecting the water flow, the water passes through the water when the rotor assembly, magnetic rotor and change as the flow speed, the Hall sensor outputs the corresponding pulse signal, the feedback to the controller, the controller
determines the size of the water flow, for control.
Specifications:
- Tube diameter: 1 inch
- Water pressure: <1.75Mpa
- Working voltage range: DC 5~24V
- Insulation resistance: >100mohm
- Accuracy: 1-60L/MIN ±3%
- Flow pulse number: 4.8 x Q (Q is L/Min)
- Low-temperature test: After storing at -20’C temperature for 72 hours and at room temperature for 1 hour, the accuracy is within ±5% compared with the first measurement
- High-temperature test: After storing at 85’C temperature for 72 hours and at room temperature for 1 hour, the accuracy is within ±3% compared with the first measurement
Features:
- This YF-G1 Water Flow Sensor is Light and Handy in Appearance, Small in Size, and Easy to Install.
- The Impeller Rotates Around the Entire Stainless Steel Bearing and the Stainless Steel Ball is Embedded to Improve the Rotational Sensitivity.
- The Sealing Ring Adopts an Upper and Lower Force Structure and will Never be Affected by Thermal Expansion and Contraction.
- The Hall Element is Imported, and Designed to be Isolated From Water, Epoxy Resin Encapsulated, Anti-Oxidation.
- All Raw Materials are in Compliance with ROHS Testing Standards
- Porous Design and Small Flow Can be Sensed as Usual.
Precautions for Use:
- Severe impact and chemical erosion are strictly prohibited.
- Throwing or collision is strictly prohibited.
- The temperature of the medium should not exceed 120 degrees
- If the water quality is too bad, please add a filter to the water inlet.
- Do not use beyond the flow range
Package Included:
1 x YF-G1 Water Flow Sensor YF-G1 Water Pipe Flow Meter Sensor Counter/Flow meter DN25 G1 Flow range 2-100L/min (Black)









Pixhawk I2C Splitter Pixhawk I2C Port Expand Board with Cable
F450 Quadcopter Frame Q450 Drone Frame F450 Tri-Color Drone Frame with PCB Board VT400 - MADE IN INDIA
Raspberry Pi 5 Single Board Computer with 2.4GHz quad-core, 64-bit Arm Cortex-A76, and LPDDR4X-4267 SDRAM 2GB
100k ohm Rotatry Potentiometer 3 Terminals Rotary Shaft Potentiometer Variable Resistor Linear Taper Rotary Potentiometer Pots
Raspberry Pi Zero 2W with Quad-Core CPU, Wi-fi, Bluetooth 4.2, BLE, Onboard Antenna
10Values 200PCS NPN PNP Power Transistor Assortment Assorted Kit BC327-BC558 with Clear Plastic Box
Female Deans T-Plug Connector Deans Connector For RC LiPo Battery T-Plug Connector For ESC High-Quality Deans Connector For RC Applications
12V 1000RPM Gear Motor Centre Shaft DC Geared Motor Heavy Duty Motor for Robotics
DC Barrel Power Jack/Connector
Waveshare 7inch Capacitive Touch Display for Raspberry Pi, DSI Interface, 800×480 Compatible with Raspberry Pi 5/4B/3B+/3A+/3B/2B/B+/A+/CM3/3+/4
300 Pieces 15 Value 1KV 2KV 3KV High Voltage Ceramic Capacitor Assortment Set Kit with Clear Plastic Box
USB Mini Discharge Load Resistor 2A/1A USB Mini Discharge Load USB Mini Discharge Load Resistor 2A/1A With Switch 1A Green led, 2A Red led Integrated Circuits
LilyPad Buzzer Small Speakers Module Compatible with Arduino - NA213
Reviews
There are no reviews yet.