Description
Description:
This is a YF-G1 Water Flow Sensor. The YF-G1 Water Flow Sensor is mainly made of a plastic body, the rotor assembly and a Hall flow sensor. It has a water heater which is mounted on the end, for detecting the water flow, the water passes through the water when the rotor assembly, magnetic rotor and change as the flow speed, the Hall sensor outputs the corresponding pulse signal, the feedback to the controller, the controller
determines the size of the water flow, for control.
Specifications:
- Tube diameter: 1 inch
- Water pressure: <1.75Mpa
- Working voltage range: DC 5~24V
- Insulation resistance: >100mohm
- Accuracy: 1-60L/MIN ±3%
- Flow pulse number: 4.8 x Q (Q is L/Min)
- Low-temperature test: After storing at -20’C temperature for 72 hours and at room temperature for 1 hour, the accuracy is within ±5% compared with the first measurement
- High-temperature test: After storing at 85’C temperature for 72 hours and at room temperature for 1 hour, the accuracy is within ±3% compared with the first measurement
Features:
- This YF-G1 Water Flow Sensor is Light and Handy in Appearance, Small in Size, and Easy to Install.
- The Impeller Rotates Around the Entire Stainless Steel Bearing and the Stainless Steel Ball is Embedded to Improve the Rotational Sensitivity.
- The Sealing Ring Adopts an Upper and Lower Force Structure and will Never be Affected by Thermal Expansion and Contraction.
- The Hall Element is Imported, and Designed to be Isolated From Water, Epoxy Resin Encapsulated, Anti-Oxidation.
- All Raw Materials are in Compliance with ROHS Testing Standards
- Porous Design and Small Flow Can be Sensed as Usual.
Precautions for Use:
- Severe impact and chemical erosion are strictly prohibited.
- Throwing or collision is strictly prohibited.
- The temperature of the medium should not exceed 120 degrees
- If the water quality is too bad, please add a filter to the water inlet.
- Do not use beyond the flow range
Package Included:
1 x YF-G1 Water Flow Sensor YF-G1 Water Pipe Flow Meter Sensor Counter/Flow meter DN25 G1 Flow range 2-100L/min (Black)








Single 18650 Battery Holder With Wire Leads and Spring Contacts 3.7v Battery Case Reliable 18650 Battery Holder For Your Projects
Radiolink R8EF RC Receiver R8EF 8 Channels 2.4GHz RC Receiver SBUS/PPM/PWM Long Range Control RX for Airplane Vehicles Robots Transmitter T8FB T8S RC8X RC4GS V3 RC6GS V3
Nano Uno Expansion Board Nano Uno Multipurpose Expansion Board Multipurpose Expansion Module
3007 Sleeve Axial Fan 5V DC 30x30x7mm
2x18650 Battery Holder 18650 x 2 Battery Holder with Cover and On/Off Switch With Open End Wires
DC Motor Fan Blade 3-Wing Fan For Toy Motor Round Sape - Red
4-Pin 30A Rocker Switch 250V 12V Illuminated Rocker Switch UL Illuminated Rocker Switch Brighten Up Your Projects With Illuminated Rocker Switch
2Wd Transparent Smart Motor Robot Car Chassis Kit with Arduino Board
Universal Heatsink Universal Aluminium Heat sink for Chip IC 40 x 40 x 11 mm
3PI miniQ N20 Micro Motor Mount Set 12mm DC Gear Motor Mounting Bracket Toy Car Accessories
USB Mini Discharge Load Resistor 2A/1A USB Mini Discharge Load USB Mini Discharge Load Resistor 2A/1A With Switch 1A Green led, 2A Red led Integrated Circuits
RDS3115MG 15KG Standard Servo Kit RDS3115 360° Continuous Rotation Servo Kit For Robotics and Automation
Reviews
There are no reviews yet.