Description
Description:
This is a YF-G1 Water Flow Sensor. The YF-G1 Water Flow Sensor is mainly made of a plastic body, the rotor assembly and a Hall flow sensor. It has a water heater which is mounted on the end, for detecting the water flow, the water passes through the water when the rotor assembly, magnetic rotor and change as the flow speed, the Hall sensor outputs the corresponding pulse signal, the feedback to the controller, the controller
determines the size of the water flow, for control.
Specifications:
- Tube diameter: 1 inch
- Water pressure: <1.75Mpa
- Working voltage range: DC 5~24V
- Insulation resistance: >100mohm
- Accuracy: 1-60L/MIN ±3%
- Flow pulse number: 4.8 x Q (Q is L/Min)
- Low-temperature test: After storing at -20’C temperature for 72 hours and at room temperature for 1 hour, the accuracy is within ±5% compared with the first measurement
- High-temperature test: After storing at 85’C temperature for 72 hours and at room temperature for 1 hour, the accuracy is within ±3% compared with the first measurement
Features:
- This YF-G1 Water Flow Sensor is Light and Handy in Appearance, Small in Size, and Easy to Install.
- The Impeller Rotates Around the Entire Stainless Steel Bearing and the Stainless Steel Ball is Embedded to Improve the Rotational Sensitivity.
- The Sealing Ring Adopts an Upper and Lower Force Structure and will Never be Affected by Thermal Expansion and Contraction.
- The Hall Element is Imported, and Designed to be Isolated From Water, Epoxy Resin Encapsulated, Anti-Oxidation.
- All Raw Materials are in Compliance with ROHS Testing Standards
- Porous Design and Small Flow Can be Sensed as Usual.
Precautions for Use:
- Severe impact and chemical erosion are strictly prohibited.
- Throwing or collision is strictly prohibited.
- The temperature of the medium should not exceed 120 degrees
- If the water quality is too bad, please add a filter to the water inlet.
- Do not use beyond the flow range
Package Included:
1 x YF-G1 Water Flow Sensor YF-G1 Water Pipe Flow Meter Sensor Counter/Flow meter DN25 G1 Flow range 2-100L/min (Black)






DC Motor Fan Blade 3-Wing Fan For Toy Motor Round Sape - Yellow Transparent
12V 1000RPM Gear Motor Centre Shaft DC Geared Motor Heavy Duty Motor for Robotics
5MP Raspberry Pi Camera 1080p Adjustable Focus Camera OV5647 Focus Camera Raspberry Pi Camera Module Raspberry Pi 3/2 Model B/B+
12 PU Connector PMM 12mm OD Union Bulkhead Connector PMM 12 Union Bulkhead For Industrial Applications
3PI miniQ N20 Micro Motor Mount Set 12mm DC Gear Motor Mounting Bracket Toy Car Accessories
Make A Line Follower Robot Using L293D Motor Driver Module Interfacing With Arduino Uno
150PCS 15 Value 100V 0.33NF- 470NF Polyester Film Capacitor Assortment Kit Plastic Box
PX4 V2.4.8 32Bit Flight Controller + NEO-M8N GPS + Power Module Multicopter FPV Quadcopter
SMD UNO R3 Arduino Compatible ATmega328 Board UNO R3 SMD Development Board CH340G SMD UNO Board
Nichicon GU 3300uF 80V Capacitor 25x45mm Snap-in PSU Capacitor High Voltage Electrolytic Capacitor For Power Supplies
Horizontal Limit Switch Module Horizontal Mechanical Limit Switch Module 3D Printer Limit Switch Module For Ender 3 Pro With Cable
Raspberry Pi 5 Single Board Computer with 2.4GHz quad-core, 64-bit Arm Cortex-A76, and LPDDR4X-4267 SDRAM 4GB
5mm White Led Light Emitting Diode (Pack of 5)
SG90 Servo Motor 9g Mini/Micro Servo Motor 360 Degrees
Reviews
There are no reviews yet.