Description
Description:
This is a YF-G1 Water Flow Sensor. The YF-G1 Water Flow Sensor is mainly made of a plastic body, the rotor assembly and a Hall flow sensor. It has a water heater which is mounted on the end, for detecting the water flow, the water passes through the water when the rotor assembly, magnetic rotor and change as the flow speed, the Hall sensor outputs the corresponding pulse signal, the feedback to the controller, the controller
determines the size of the water flow, for control.
Specifications:
- Tube diameter: 1 inch
- Water pressure: <1.75Mpa
- Working voltage range: DC 5~24V
- Insulation resistance: >100mohm
- Accuracy: 1-60L/MIN ±3%
- Flow pulse number: 4.8 x Q (Q is L/Min)
- Low-temperature test: After storing at -20’C temperature for 72 hours and at room temperature for 1 hour, the accuracy is within ±5% compared with the first measurement
- High-temperature test: After storing at 85’C temperature for 72 hours and at room temperature for 1 hour, the accuracy is within ±3% compared with the first measurement
Features:
- This YF-G1 Water Flow Sensor is Light and Handy in Appearance, Small in Size, and Easy to Install.
- The Impeller Rotates Around the Entire Stainless Steel Bearing and the Stainless Steel Ball is Embedded to Improve the Rotational Sensitivity.
- The Sealing Ring Adopts an Upper and Lower Force Structure and will Never be Affected by Thermal Expansion and Contraction.
- The Hall Element is Imported, and Designed to be Isolated From Water, Epoxy Resin Encapsulated, Anti-Oxidation.
- All Raw Materials are in Compliance with ROHS Testing Standards
- Porous Design and Small Flow Can be Sensed as Usual.
Precautions for Use:
- Severe impact and chemical erosion are strictly prohibited.
- Throwing or collision is strictly prohibited.
- The temperature of the medium should not exceed 120 degrees
- If the water quality is too bad, please add a filter to the water inlet.
- Do not use beyond the flow range
Package Included:
1 x YF-G1 Water Flow Sensor YF-G1 Water Pipe Flow Meter Sensor Counter/Flow meter DN25 G1 Flow range 2-100L/min (Black)









Bambu Lab PETG-CF 3D Printer Filament 1.75mm Black
5010 750KV Brushless Motor 5010 750KV High Torque Brushless Motor for Drone
Official Raspberry Pi Zero Case Compatible with Raspberry Pi Zero, Zero W, Zero 2W
Raspberry Pi 5MP Camera Module Raspberry Pi Camera v1.3 with Cable High-Quality Camera for Raspberry Pi 3/4 Model B/B+
Radiolink M8N TS100 GPS Module Compass Module High Positioning Accuracy for Flight Controller DIY RC Drone FPV
Bonka 2200mAh Lipo Battery 11.1V 35C Lithium Polymer Battery XT60 Connector 11.1V 3S Lipo Battery
iMAX B6 Charger iMAX B6 80W 6A Charger/Discharger 1-6 Cells
SM 2 Pin Plug Female Connector Adapter with 150 mm Electrical Cable Wire for LED Light
12x8cm Double-Sided PCB Double Side Copper Prototype Universal PCB Prototype Board
Solderless Breadboard 830 Tie Points MB102
M8N GPS Compass Module GPS Module With Built-in Electronic Compass High Precision M8N GPS and Electronic Compass Module For Accurate Positioning and Navigation
Readytosky 80A 2-6S Brushless ESC 2-6S Brushless Electronic Speed Controller (ESC) High Power 80A ESC For FPV Racing Drones and Quadcopters
65-Pieces T-Tap Wire Connector Kit Insulated Wire Connector 22-18, 18-14, 12-10 AWG Assortment Kit For Fast & Reliable Wiring
1.8 inch LCD Display Module ST7735 Driver TFT 128x160 4 IO LCD Display Arduino Compatible LCD Microcontroller Compatible LCD
ELECROW Crowtail - Micro:bit Base Shield V2.2 Expandable Microbit Base Shield Supercharge Your Microbit Projects
8-Pin 8pins DIL DIP IC Socket PCB Mount Connector
2Wd Transparent Smart Motor Robot Car Battery Box Chassis Kit For Arduino
Fluo Popsicle Yellow PLA PRO+
Generic Micro Endstop Switch Micro Switch Mechanical End Stop AC 250V 5A SPDT Miniature NO/NC Switch For Reprap 3D Printer/CNC/DIY
Multi-function 4WD Robot Car Kit Ultrasonic Module UNO R3 Assembly Compatible with Arduino
3S 11.1V BMS Board 3S 11.1V 10A 18650 Lithium Battery Overcharge And Over-current Protection board-Good Quality
Waveshare 4 inch LCD 10.16cm RPi LCD (A) 480x320 Raspberry Pi Display
3296W 10k Trimpot Trimmer Potentiometer 103 10k Ohm Miniature Adjustable Trimpot Variable Resistor For PCB Mounting
LilyPad Tri-Color LED RGB Module For arduino LilyPad LED Module Tri-color
0.4mm 3D Printer Nozzle 0.4mm MK8 M6 Nozzle 3D Printer Nozzles
Raspberry Pi 4 TFT 3.5 inch Touch Screen with Case, 480x320 Resolution 60fps Monitor LCD Display
Raspberry Pi Telephoto Lens 16mm RPi Telephoto Lens High-Quality 16mm Telephoto Lens Zoom In On The Details With A 16mm Telephoto Lens
JX Servo PS-1181HB 17g Plastic Gear For RC Model, Helicopter Parts Core Motor For RC Helicopter Car Boat Airplane
2x18650 Battery Holder 18650 x 2 Battery Holder with Cover and On/Off Switch With Open End Wires
Reviews
There are no reviews yet.