Description
Description:
This is a YF-G1 Water Flow Sensor. The YF-G1 Water Flow Sensor is mainly made of a plastic body, the rotor assembly and a Hall flow sensor. It has a water heater which is mounted on the end, for detecting the water flow, the water passes through the water when the rotor assembly, magnetic rotor and change as the flow speed, the Hall sensor outputs the corresponding pulse signal, the feedback to the controller, the controller
determines the size of the water flow, for control.
Specifications:
- Tube diameter: 1 inch
- Water pressure: <1.75Mpa
- Working voltage range: DC 5~24V
- Insulation resistance: >100mohm
- Accuracy: 1-60L/MIN ±3%
- Flow pulse number: 4.8 x Q (Q is L/Min)
- Low-temperature test: After storing at -20’C temperature for 72 hours and at room temperature for 1 hour, the accuracy is within ±5% compared with the first measurement
- High-temperature test: After storing at 85’C temperature for 72 hours and at room temperature for 1 hour, the accuracy is within ±3% compared with the first measurement
Features:
- This YF-G1 Water Flow Sensor is Light and Handy in Appearance, Small in Size, and Easy to Install.
- The Impeller Rotates Around the Entire Stainless Steel Bearing and the Stainless Steel Ball is Embedded to Improve the Rotational Sensitivity.
- The Sealing Ring Adopts an Upper and Lower Force Structure and will Never be Affected by Thermal Expansion and Contraction.
- The Hall Element is Imported, and Designed to be Isolated From Water, Epoxy Resin Encapsulated, Anti-Oxidation.
- All Raw Materials are in Compliance with ROHS Testing Standards
- Porous Design and Small Flow Can be Sensed as Usual.
Precautions for Use:
- Severe impact and chemical erosion are strictly prohibited.
- Throwing or collision is strictly prohibited.
- The temperature of the medium should not exceed 120 degrees
- If the water quality is too bad, please add a filter to the water inlet.
- Do not use beyond the flow range
Package Included:
1 x YF-G1 Water Flow Sensor YF-G1 Water Pipe Flow Meter Sensor Counter/Flow meter DN25 G1 Flow range 2-100L/min (Black)









Bambu Lab A1 Mini 3D Printer
L9110 Fan Module Fire Fighting Robot Fan Drive Module for Arduino
12V 100RPM Gear Motor Centre Shaft DC Geared Motor Heavy Duty Motor
Bambu Lab PETG-CF 3D Printer Filament 1.75mm Brick Red
600PCS 15Values 40-160V 50-600mA NPN PNP Power Transistor Kit 2N2222-S9018 Triode Transistor Assortment Kit
Raspberry Pi 4 Model-B 2GB SDRAM Raspberry PI 4B SBC IOT Board - Broadcom 1.5GHZ A72 Processor
Assorted Electrolytic Capacitor Kit 200pcs 0.1-220uF 15 Value Electrolytic Capacitor Assortment Box Kit
CX-10D Mini Drone Newest Cheerson CX-10D RC Mini Nano Drone 2.4G 6-axis High Hold Mode LED RC Quadcopter RTF with Transmitter
100k ohm Rotatry Potentiometer 3 Terminals Rotary Shaft Potentiometer Variable Resistor Linear Taper Rotary Potentiometer Pots
Reviews
There are no reviews yet.