Description
Description:
SIM7070GÂ is a telecommunication HAT for Raspberry Pi which supports global bands of NB-IoT, Cat-M, and GPRS, as well as GNSS positioning function. Due to its advantages like small size, low delay, and wide coverage, SIM7070G is the ideal choice for IoT applications such as intelligent instruments, asset tracking, remote monitoring, e-health, and so on.
Compared to SIM7080G, this module also supports GPRS (2G); compared to SIM7000C/E, it is more generic due to the global bands support.
Specifications:
| NB-IOT/CAT-M/2G | |
|---|---|
| Band | NB-IoT: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B28/B66/B71/B85 |
| Cat-M: B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26/B27/B28/B66/B85 | |
| GSM/GPRS/EDGE: 850/900/1800/1900MHz | |
| Data rate | NB-IoT: 136Kbps(DL)/150Kbps(UL) |
| Cat-M: 589Kbps(DL)/1119Kbps(UL) | |
| GPRS: 85.6Kbps(DL)/85.6Kbps(UL) | |
| EDGE: 236.8Kbps(DL)/236.8Kbps(UL) | |
| SIM card support | NB-IoT/Cat-M/2G card (1.8V SIM card ONLY) |
| Applicable region | global |
| GNSS | |
| Satellite systems | GPS, BeiDou, GLONASS, Galileo |
| Receiver type | 16-channel |
| C/A Code | |
| Band | GPS L1: 1575.42 ± 1.023MHz |
| GLONASS L1: 1598.0625 ~ 1605.375MHz | |
| BDS B1: 1559.052 ~ 1591.788MHz | |
| Galileo L1: 1575.42 ± 1.023MHz | |
| Data format | NMEA-0183 |
| Antenna | Active antenna |
| Other | |
| Power supply | 5V |
| Operating voltage | 5V / 3.3V (configured via 0Ω resistor) |
| Current consumption | about 41mA (idle mode) |
| Operating temperature | -40°C ~ 85°C |
| Storage temperature | -45°C ~ 90°C |
| Dimensions | 30.50mm × 65.00mm |
Features:
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
- SIM7070G supports communication protocols such as TCP/UDP/HTTP/HTTPS/TLS/DTLS/PING/LWM2M/COAP/MQTT
- SIM7070G supports GNSS positioning (GPS, BeiDou, GLONASS, Galileo)
- Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
- Breakout UART control pins, to connect with host boards like Arduino/STM32
- SIM card slot supports ONLY 1.8V SIM card (3V SIM card is not available)
- 2x LED indicators, easy to monitor the working status
- Baudrate: 300~3686400 bps
- Common baud rate auto-negotiation: 9600/19200/38400/57600/115200 bps
- SIM7070G comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
Package Included:
1 x Waveshare SIM7070G NB-IoT / Cat-M / GPRS / GNSS HAT for Raspberry Pi, Global Band Support
FlySky Data Line Cable Access Wiring Connector for T6 i6, FS-i6, FS-T6 Transmitter 
32 Channel Robot Servo Control Board Servo Motor Controller PS2 Wireless Control USB/UART Connection Mode Versatile Servo Controller For Robotics And Automation Projects 
Arducam M12 Lens Board Precision Focus and Angle Enhancement M12 Adjustable Lens Board For Raspberry Pi 4/3/3 B+ Camera 
NEMA23 Stepper Motor 18.9 kg-cm Hybrid Stepper Motor - Round Type Shaft 
DC Barrel Power Jack/Connector 
Radiolink Byme-D Flight Controller Radiolink Byme-D Stabilizer 3 Channels Flight Controller with Gyroscope 3D Fly FC for Delta Wing Paper Plane 
5V Mini Stepper Motor 28BYJ-48 Stepper Motor - 5V Unipolar 
12V 200RPM Gear Motor Centre Shaft DC Geared Motor Heavy Duty Motor for Robotics 
Dual Shaft BO Motor 150 RPM 
4 USB Fast Charging Module Board 12V24V to QC2.0 QC3.0 Step Down Power Supply Module 12V 24V 
Candy Red PLA PRO+
Reviews
There are no reviews yet.