Description
Description:
SIM7070GÂ is a telecommunication HAT for Raspberry Pi which supports global bands of NB-IoT, Cat-M, and GPRS, as well as GNSS positioning function. Due to its advantages like small size, low delay, and wide coverage, SIM7070G is the ideal choice for IoT applications such as intelligent instruments, asset tracking, remote monitoring, e-health, and so on.
Compared to SIM7080G, this module also supports GPRS (2G); compared to SIM7000C/E, it is more generic due to the global bands support.
Specifications:
| NB-IOT/CAT-M/2G | |
|---|---|
| Band | NB-IoT: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B28/B66/B71/B85 |
| Cat-M: B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26/B27/B28/B66/B85 | |
| GSM/GPRS/EDGE: 850/900/1800/1900MHz | |
| Data rate | NB-IoT: 136Kbps(DL)/150Kbps(UL) |
| Cat-M: 589Kbps(DL)/1119Kbps(UL) | |
| GPRS: 85.6Kbps(DL)/85.6Kbps(UL) | |
| EDGE: 236.8Kbps(DL)/236.8Kbps(UL) | |
| SIM card support | NB-IoT/Cat-M/2G card (1.8V SIM card ONLY) |
| Applicable region | global |
| GNSS | |
| Satellite systems | GPS, BeiDou, GLONASS, Galileo |
| Receiver type | 16-channel |
| C/A Code | |
| Band | GPS L1: 1575.42 ± 1.023MHz |
| GLONASS L1: 1598.0625 ~ 1605.375MHz | |
| BDS B1: 1559.052 ~ 1591.788MHz | |
| Galileo L1: 1575.42 ± 1.023MHz | |
| Data format | NMEA-0183 |
| Antenna | Active antenna |
| Other | |
| Power supply | 5V |
| Operating voltage | 5V / 3.3V (configured via 0Ω resistor) |
| Current consumption | about 41mA (idle mode) |
| Operating temperature | -40°C ~ 85°C |
| Storage temperature | -45°C ~ 90°C |
| Dimensions | 30.50mm × 65.00mm |
Features:
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
- SIM7070G supports communication protocols such as TCP/UDP/HTTP/HTTPS/TLS/DTLS/PING/LWM2M/COAP/MQTT
- SIM7070G supports GNSS positioning (GPS, BeiDou, GLONASS, Galileo)
- Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
- Breakout UART control pins, to connect with host boards like Arduino/STM32
- SIM card slot supports ONLY 1.8V SIM card (3V SIM card is not available)
- 2x LED indicators, easy to monitor the working status
- Baudrate: 300~3686400 bps
- Common baud rate auto-negotiation: 9600/19200/38400/57600/115200 bps
- SIM7070G comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
Package Included:
1 x Waveshare SIM7070G NB-IoT / Cat-M / GPRS / GNSS HAT for Raspberry Pi, Global Band Support
1200TVL CMOS FPV Camera High Definition 2.1mm Lens Camera RC Drone Camera Multi-Copter Camera for FPV Racing RC Drone FPV Camera For Aerial Photography And Videography 
2 Pin Female JST Connector 2 Pin Battery Connector for JST RCY Plug Female Connectors Wire for RC Toys Battery 
Waveshare 1.8inch LCD Display Module For Raspberry Pi Pico 65K RGB Colors 160×128 Pixels TFT Screen SPI Interface 
Bambu Lab TPU 95A HF 1.75mm 3D Filament Yellow 
USB Mini Discharge Load Resistor 2A/1A USB Mini Discharge Load USB Mini Discharge Load Resistor 2A/1A With Switch 1A Green led, 2A Red led Integrated Circuits 
Waveshare 2.8inch Resistive Touch LCD, 320x240, Raspberry Pi/Arduino 
GT2 Timing Belt 10M GT2 Width 6mm Black Open Timing Belt For 3D Printer 
30A ESC 30A BLDC ESC Electronic Speed Controller with Connectors for RC Quadcopter Plane Helicopter 
Royal Blue PLA PRO+ 
5mm Green LED Light Emitting Diode (Pack of 5) 
1555 Propeller 15x5.5 2 Blades Carbon Fiber CW/CCW Propeller For T-Motor 
JoyStick Shield Module Joystick Shield Gamepad Analog Keyboard and Mouse Function for Arduino FR4 Wireless Bluetooth DIY Shield V1 Expansion Board Red For DIY Projects Simulated Keyboard Mouse RF Transceiver Module 
Bambu Lab TPU 95A HF 1.75mm 3D Filament Blue 
Radiolink SUI04 Ultrasonic Sensor Range Finder Obstacle Avoidance for Racing Drone, Robots, Quadcopter, Multi-Copter 
Bambu Lab A1 3D Printer 
Amass XT30UPB-M30.G.Y Male Connector XT30UPB30 Connector for FPV Racing Quadcopter Multirotor Airplane 
Arduino MEGA 2560 R3 CH340 Board ATmega2560 Development Board Arduino Compatible
Reviews
There are no reviews yet.