Description
Description:
SIM7070GÂ is a telecommunication HAT for Raspberry Pi which supports global bands of NB-IoT, Cat-M, and GPRS, as well as GNSS positioning function. Due to its advantages like small size, low delay, and wide coverage, SIM7070G is the ideal choice for IoT applications such as intelligent instruments, asset tracking, remote monitoring, e-health, and so on.
Compared to SIM7080G, this module also supports GPRS (2G); compared to SIM7000C/E, it is more generic due to the global bands support.
Specifications:
| NB-IOT/CAT-M/2G | |
|---|---|
| Band | NB-IoT: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B28/B66/B71/B85 |
| Cat-M: B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26/B27/B28/B66/B85 | |
| GSM/GPRS/EDGE: 850/900/1800/1900MHz | |
| Data rate | NB-IoT: 136Kbps(DL)/150Kbps(UL) |
| Cat-M: 589Kbps(DL)/1119Kbps(UL) | |
| GPRS: 85.6Kbps(DL)/85.6Kbps(UL) | |
| EDGE: 236.8Kbps(DL)/236.8Kbps(UL) | |
| SIM card support | NB-IoT/Cat-M/2G card (1.8V SIM card ONLY) |
| Applicable region | global |
| GNSS | |
| Satellite systems | GPS, BeiDou, GLONASS, Galileo |
| Receiver type | 16-channel |
| C/A Code | |
| Band | GPS L1: 1575.42 ± 1.023MHz |
| GLONASS L1: 1598.0625 ~ 1605.375MHz | |
| BDS B1: 1559.052 ~ 1591.788MHz | |
| Galileo L1: 1575.42 ± 1.023MHz | |
| Data format | NMEA-0183 |
| Antenna | Active antenna |
| Other | |
| Power supply | 5V |
| Operating voltage | 5V / 3.3V (configured via 0Ω resistor) |
| Current consumption | about 41mA (idle mode) |
| Operating temperature | -40°C ~ 85°C |
| Storage temperature | -45°C ~ 90°C |
| Dimensions | 30.50mm × 65.00mm |
Features:
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
- SIM7070G supports communication protocols such as TCP/UDP/HTTP/HTTPS/TLS/DTLS/PING/LWM2M/COAP/MQTT
- SIM7070G supports GNSS positioning (GPS, BeiDou, GLONASS, Galileo)
- Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
- Breakout UART control pins, to connect with host boards like Arduino/STM32
- SIM card slot supports ONLY 1.8V SIM card (3V SIM card is not available)
- 2x LED indicators, easy to monitor the working status
- Baudrate: 300~3686400 bps
- Common baud rate auto-negotiation: 9600/19200/38400/57600/115200 bps
- SIM7070G comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
Package Included:
1 x Waveshare SIM7070G NB-IoT / Cat-M / GPRS / GNSS HAT for Raspberry Pi, Global Band Support
Radiolink CrossRace V1.0 Flight Controller High Performance CrossRace APM Flight Controller Stack OSD Integrated For DJI HD VTX System For RC Drone 
Arduino MEGA 2560 R3 CH340 Board ATmega2560 Development Board Arduino Compatible 
DC Motor Fan Blade 3-Wing Fan For Toy Motor Round Sape - Red 
Bambu Lab X1 – Carbon Combo 3D Printer 
Ultra Mini Breadboard XF-25 Breadboard - White (Pack of 2) 
3M 20mm Double Sided Adhesive Pad Dia Multipurpose Double Sided Sponge Glue Adhesive Dash Pad For GPS - 4Pcs 
DIY NANO IO Shield V1.O Expansion Board Compatible with Arduino 
1000KV BLDC Motor High Performance 1000KV BLDC Motor Perfect For Drones And RC Models Lightweight Motor Model Aircraft Motor 
CD4504 IC Hex Voltage Level Shifter IC DIP-16 Package 
300 RPM Single Shaft BO rectangle Motor 
2Wd Transparent Smart Motor Robot Car Chassis Kit with Arduino Board 
3PI miniQ Car wheel Tyre 42mm N20 DC Gear Motor Wheel 
Waveshare 4.3inch Capacitive Touch LCD 800x480 Pixels Resolution IPS Panel 216 Colors Via 24-Bit RGB Interface For Pi 
ULN2003 Stepper Motor Driver ULN2003A Driver Module Stepper Motor Driver Board 
Waveshare 15.6" Full HD IPS Monitor 100% sRGB Color Accuracy, 1920x1080 IPS Display, Slim Profile With Adjustable Stand For Stunning Clarity
Reviews
There are no reviews yet.