Waveshare 2.7inch E-Paper HAT Compatible with Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/WH/Zero 2W Series Boards 264×176 Resolution SPI Interface

Description

Description:

This is a 2.7inch E-Ink Display HAT for Raspberry Pi, 264×176 resolution, with an embedded controller, communicating via the SPI interface. Due to advantages like ultra-low power consumption, wide viewing angle, and clear display without electricity, it is an ideal choice for applications such as shelf labels, industrial instruments, and so on.

Specifications:

• Operating Voltage: 3.3V/5V
• Interface: 3-wire SPI, 4-wire SPI
• Outline Dimension: 85mm x 56mm
• Display Size: 57.288mm x 38.192mm
• Dot Pitch: 0.217 x 0.217
• Resolution: 264 x 176
• Display Color: Black, White
• Grey Level: 2
• Full Refresh Time: 15s
• Refresh Power: 26.4mW(typ.)
• Standby Power: <0.017mW
• Viewing Angle: >170°

Features:

• No backlight keeps displaying the latest content for a long time even when powered down
• 2.7inch E-Ink Display HAT has ultra-low power consumption power is only required for refreshing
• Onboard 4x Keys for extended applications
• Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
• E-Ink Display HAT has an SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/STM32, etc.
• Onboard voltage translator, compatible with 3.3V/5V MCUs
• 2.7inch E-Ink Display HAT comes with development resources and manual(examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Pin Description:

• VCC: Power (3.3V/5V input)
• GND: Ground
• DIN: SPI MOSI pin
• CLK: SPI SCK pin
• CS: SPI chip selection, low active
• DC: Data/Command selection (high for data, low for command)
• RST: External reset, low active
• TFT: Busy status output pin

Useful Link:

Waveshare 2.7inch E-Ink Display HAT

Package Included:

• 1 x Waveshare 2.7inch E-Paper HAT
• 1 x Interfacing Cable