Description
Description:
Readytosky 80A 2-6S Brushless ESC comes with a multi-integrated special program, fast throttle response, and surpasses all kinds of open-source software. Firmware was optimized specifically integrated circuitously for the disc motor, and it has very good compatibility this ESC is compatible with 2-6s Lipo Battery.
2-6S Brushless Electronic Speed Controller is specifically made for quadcopters and multi-rotors. Which provides faster and better motor speed control giving better flight performance compared to other available ESCs. Due to ultra-low resistance MOSFET, it has a strong flow capacity. With the MOSFET special driver integrated circuit, its performance and stability far surpass the driving circuit with discrete components built.
Specification:
- Model: 80A Brushless ESC
- Burst Current: 100A
- Constant Current: 80A
- BEC: Yes (5V/5A)
- Compatible Lipo Batteries: 2 ~ 6S
- Throttle Signal Refresh Rate: 50 ~ 432Hz
- Maximum Speed: 210000 2-pole motor rev / min, 6-pole motors 70,000 rev / min, 12 pole motors 35,000 rev / min
- Colour: Black
Features:
- Security power function: When the power is turned on, regardless of the throttle stick at any position will not start the motor immediately to prevent personal injury;
- Throttle range calibrated function: to adapt the throttle differences between different strokes, and improve the linearity of throttle response.
- programmed project (available throttle stick or card LED parameter settings):
- Brake setting: No brake / with brake.
- Battery Type: Lithium battery / NiMH.
- Low Voltage Protection Mode: Soft Shutdown / hard off.
- Low Voltage Protection Threshold: low/medium/high.
- start mode: Normal / Soft / Super-soft and start.
- Timing: low/medium/high.
- Restore factory defaults.
- Comprehensive protection features:
- Under-voltage protection: the program set by the user when the battery voltage is below the protection threshold, ESC automatically reduces the output power;
- Overvoltage Protection: input voltage exceeds the input range is not allowed to start, automatic protection, also issued a hasty “beep” Warning ;
- Overheat protection: built-in temperature detection circuit that automatically reduces the output power ESC temperature is too high;
- Remote signal loss protection: The remote control signal is lost for 1 second to reduce the power, and then has two seconds to turn off without the remote control signal output.
Package Included:
1 x Readytosky 80A 2-6S Brushless ESC 2-6S Brushless Electronic Speed Controller (ESC) High Power 80A ESC For FPV Racing Drones and Quadcopters









Bambu Lab X1E 3D Printer Combo
Bambu Lab TPU 95A HF 1.75mm 3D Filament Blue
55mm Copper Crocodile Clip Copper Insulated Crocodile Clip 55mm Insulated Clip Opening 10mm For Banana Plug 4mm High-Quality Crocodile Clip - Yellow
2Wd Transparent Smart Motor Robot Car Battery Box Chassis Kit For Arduino
Nichicon GU 3300uF 80V Capacitor 25x45mm Snap-in PSU Capacitor High Voltage Electrolytic Capacitor For Power Supplies
N20 Gear Motor 3-9V 600RPM High Torque Gear Motor 14mm Shaft Micro DC Gear Motor Versatile N20 Metal Gear Motor
L9110 Fan Module Fire Fighting Robot Fan Drive Module for Arduino
Sipeed Lichee Nano Linux Development Board 16M Flash Version Nano Linux Development Board
Ender 3 V3 KE 3D Printer
ReadytoSky 30A ESC 2-6S Brushless Speed Controller For RC Quad Multicopter High-Current ESC For Drone Racing
30A ESC 30A BLDC ESC Electronic Speed Controller with Connector
12V 200 RPM Geared Motor Johnson DC Gearbox Motor High-Torque 200 RPM Geared Motor High-Performance 100 RPM DC Geared Motor
EL Wire LED Lights Glow EL Wire String Strip 1M Neon Lights Noise Reduction Neon Glowing Strobing Electroluminescent Wire For Parties, Halloween, DIY Decoration - Orange
Raspberry Pi 3 Model B+ RPI 3 B Plus with 1GB BCM2837B0 1.4 GHz Arm Cortex-A53 Support WiFi 2.4 GHz and Bluetooth 4.2
Electric Wire Push Type Lock CH-2 Way Quick Push Type Lock Electric Wire Connectors Terminal Cable Lock Push Connector Terminals
Reviews
There are no reviews yet.