Description
Description:
Readytosky 80A 2-6S Brushless ESC comes with a multi-integrated special program, fast throttle response, and surpasses all kinds of open-source software. Firmware was optimized specifically integrated circuitously for the disc motor, and it has very good compatibility this ESC is compatible with 2-6s Lipo Battery.
2-6S Brushless Electronic Speed Controller is specifically made for quadcopters and multi-rotors. Which provides faster and better motor speed control giving better flight performance compared to other available ESCs. Due to ultra-low resistance MOSFET, it has a strong flow capacity. With the MOSFET special driver integrated circuit, its performance and stability far surpass the driving circuit with discrete components built.
Specification:
- Model: 80A Brushless ESC
- Burst Current: 100A
- Constant Current: 80A
- BEC: Yes (5V/5A)
- Compatible Lipo Batteries: 2 ~ 6S
- Throttle Signal Refresh Rate: 50 ~ 432Hz
- Maximum Speed: 210000 2-pole motor rev / min, 6-pole motors 70,000 rev / min, 12 pole motors 35,000 rev / min
- Colour: Black
Features:
- Security power function: When the power is turned on, regardless of the throttle stick at any position will not start the motor immediately to prevent personal injury;
- Throttle range calibrated function: to adapt the throttle differences between different strokes, and improve the linearity of throttle response.
- programmed project (available throttle stick or card LED parameter settings):
- Brake setting: No brake / with brake.
- Battery Type: Lithium battery / NiMH.
- Low Voltage Protection Mode: Soft Shutdown / hard off.
- Low Voltage Protection Threshold: low/medium/high.
- start mode: Normal / Soft / Super-soft and start.
- Timing: low/medium/high.
- Restore factory defaults.
- Comprehensive protection features:
- Under-voltage protection: the program set by the user when the battery voltage is below the protection threshold, ESC automatically reduces the output power;
- Overvoltage Protection: input voltage exceeds the input range is not allowed to start, automatic protection, also issued a hasty “beep” Warning ;
- Overheat protection: built-in temperature detection circuit that automatically reduces the output power ESC temperature is too high;
- Remote signal loss protection: The remote control signal is lost for 1 second to reduce the power, and then has two seconds to turn off without the remote control signal output.
Package Included:
1 x Readytosky 80A 2-6S Brushless ESC 2-6S Brushless Electronic Speed Controller (ESC) High Power 80A ESC For FPV Racing Drones and Quadcopters









18*30cm Universal PCB Prototype Board 18*30 cm Universal PCB Prototype Board Single-Sided 2.54mm Hole Good For DIY Soldering Electronic Projects Green Thickness
15A Test Lead Wire 4mm Banana Plug And Alligator/Crocodile Clip 15A Multimeter DIY Test Wires With Secure Connections - Green
BeagleBone Black Rev C Development Board Cortex-A8 Board Open-Source Hardware Compact Development Platform
Bambu Lab TPU 95A HF 1.75mm 3D Filament White
Raspberry Pi Pico H RP2040 Microcontroller Chip Development Board
AD16-16C LED Pilot Light AC220V 16mm LED Power Pilot Light AC220V Panel Mount LED Indicator Light Compact and Durable Power Pilot Light - White
1400KV BLDC Motor A2212 10T 1400KV Brushless Motor for Drone
4 x 18650 Battery Holder 18650 Battery Case Plastic Storage Box Holder For 4 Cell 18650 Battery Storage Box Without Cover - Black
mm RGB LED Common Anode 4-Pin Tri-Color Emitting Diodes F5 - Frosted
Arducam M12 Lens Board Precision Focus and Angle Enhancement M12 Adjustable Lens Board For Raspberry Pi 4/3/3 B+ Camera
Horizontal Limit Switch Module Horizontal Mechanical Limit Switch Module 3D Printer Limit Switch Module For Ender 3 Pro With Cable
Reviews
There are no reviews yet.