Description
Description:
The Readytosky 30A ESC 2-6S Brushless Electronic Speed Controller is a reliable and well-made product for RC helicopter and quadcopter enthusiasts. The ESCs do not have a forward and reverse feature, so users should keep that in mind. They also need to be calibrated before use, with a calibration video provided for assistance.
These ESCs work well with flight controls, but not directly with receivers. Users should ensure that their control supports PWM signal output. The firmware on these ESCs cannot be refreshed or updated, as it is from the manufacturer. The white wire on the control wires is for the PID signal, while the black wire is for the ground.
However, there is no ESC-type option for calibration in the mission planner. Users are encouraged to follow a provided video tutorial for calibration, and more assistance is available through messaging. Unfortunately, these ESCs do not support dshot ESC protocol.
Overall, customers have found the Readytosky 30A ESC to be of good quality and well-made. However, there has been a mention of the wires not reaching the PDB on the S500 frame. More updates on the performance of these ESCs are expected after flights.
Specifications:
- Cont. Current: 30A
- Max. Current: 40A
- BEC: No (OPTO ESC)
- Li-ion/Li0poly: 2-6S
Features:
- Specifically optimized firmware ESC, the ESC has very good compatibility;
- Highly intelligent, adaptive ability, extremely easy to use;
- Throttle signal line is a twisted pair, copper wire to reduce crosstalk signal generated
- Supports up to 621Hz refresh rates up to the throttle signal, compatible with a variety of flight control (Note: More than 500Hz signal of the throttle throttle are all non-standard signal)
- Use MOSFET special driver chip, performance and stability far beyond the driving circuit with discrete components built
Package Included:
1 x ReadytoSky 30A ESC Opto 2-6S Brushless Speed Controller For RC Quad Multicopter High-Current ESC For Drone Racing









2 Axis Pan Tilt Brackets For Cameras & Sensors for SG90S MG90S Servo
10x15mm Cable Drag Chain 10 x 15mm 1m Cable Drag Chain Wire Carrier
USB Type-A Male PCB R/A Connector USB 4-Pin Male Connector USB A-Type Plug Male PCB Mount Right Angle
100pcs Diode Assortment Kit Rectifier Diode Kit Electronics Diode Kit 8 Values DIY Electronic Components Diode Assortment Standard Recovery Power Rectifier 1N4148 1N4007 1N5819 1N5399 FR107 FR207 1N5408 1N5822
Raspberry Pi 5 Single Board Computer with 2.4GHz quad-core, 64-bit Arm Cortex-A76, and LPDDR4X-4267 SDRAM 16GB
2 Pin Female JST Connector 2 Pin Battery Connector for JST RCY Plug Female Connectors Wire for RC Toys Battery
Radiolink Byme-A Flight Controller Byme-A V2.0 RC Flight Controller Airplane Stabilizer with Gyro, 6 Flight Modes 4 Channels for A560 Stunt, 3D Fixed-Wing Airplane, Straight Wing, Jet, T-Tail Aircraft and More
Raspberry Pi 4 Model-B 4GB SDRAM Raspberry PI 4B SBC IOT Board - Broadcom 1.5GHZ A72 Processor
5MM Blue Led Light Emitting Diode (Pack of 5)
32 Channel Robot Servo Control Board Servo Motor Controller PS2 Wireless Control USB/UART Connection Mode Versatile Servo Controller For Robotics And Automation Projects
3mm LED Holder With 4 Mounting Holes & Yellow LED, Panel Mount LED Indicator, PACK OF 5
Bambu Lab A1 3D Printer
L9110 Fan Module Fire Fighting Robot Fan Drive Module for Arduino
4500mAh Lipo Battery 14.8V 4500mAh 4S 30C Lithium Polymer Battery
N20 Gear Motor N20 3V 35 RPM Micro Metal Gear Motor With Encoder N20 Motor
Waveshare 7inch Capacitive Touch Display for Raspberry Pi, DSI Interface, 800×480 Compatible with Raspberry Pi 5/4B/3B+/3A+/3B/2B/B+/A+/CM3/3+/4
EU Plug Universal Battery Charger Single Cell Battery Charger For 18650, 16340, 14500, Li-ion Rechargeable Battery Charger
Reviews
There are no reviews yet.