Description
Description:
Raspberry Pi 3 A+ is similar to the Raspberry Pi 3 B Plus but has had a few of its extra features removed. It still packs the same processing power but in a much smaller package.
The Raspberry Pi 3 A Plus represented a considerable upgrade over the previous A Plus model. It was bringing with it the improvements from two whole generations of Raspberry Pi.
The new Upgraded 2018s Raspberry Pi 3 Model A+ now comes with the Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz quad-core processor, dual-band wireless LAN, Bluetooth 4.2/BLE in the same mechanical format as the Raspberry Pi 1 Model A+.
With Extended 40-pin GPIO header and Full-size HDMI, it is the perfect board for the minimalist Pi fan. This low-cost Pi uses the same processor as the model B+ but does away with the Ethernet jack and three USB Ports. This makes it lower power, less expensive and much lighter smaller!
It’s still compatible with all Pi operating systems and software and has the same 40-pin GPIO connector and camera/display sockets, so any HATs Pi Plates or other things that plug into the model B+ will work just the same. It also has the same HDMI, sound/composite connector and micro-USB connector for power.
Specifications:
Processor:
- Broadcom BCM2837B0, Cortex-A53
- 64-bit SoC @ 1.4 GHz
- Memory: 512MB LPDDR2 SDRAM
Connectivity:
- 2.4 GHz and 5 GHz IEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2/BLE
- 1 × USB 2.0 port
Access:
- Extended 40-pin GPIO header
Video & sound:
- 1 × full-size HDMI
- MIPI DSI display port
- MIPI CSI camera port
- 4 pole stereo output and composite video port
Multimedia:
- H.264, MPEG-4 decode (1080p30);
- H.264 encode (1080p30);
- OpenGL ES 1.1, 2.0 graphics
SD card support:
- Micro SD format for loading operating system and data storage
- Input power: 5 V/2.5 A DC via micro USB connector
- 5 V DC via GPIO header
Environment:
- Operating temperature, 0–50°C
Features:
- Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz
- 512MB LPDDR2 SDRAM
- 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2/BLE
- Extended 40-pin GPIO header
- Full-size HDMI®
- Single USB 2.0 ports
- CSI camera port for connecting a Raspberry Pi Camera
- DSI display port for connecting a Raspberry Pi Touch Display
- 4-pole stereo output and composite video port
- Micro SD port for loading your operating system and storing data
- 5V/2.5A DC power input
Package Included:
1 x Raspberry Pi 3 A+ Pi 3 Model A Plus SBC Board Cortex A53-512 MB RAM India 2018 Model









Nano R3 with CH340 Arduino Nano Compatible Nano Board Mini-USB Port (Unsoldered)
Raspberry Pi Pico 2 W with 2.4GHz 802.11n Wireless LAN and Bluetooth 5.2 RP2350 Pico 2W Wireless Microcontroller Board
ATTINY85 Development Board ATTINY85 USB Development Board ATTINY85 Module
2Wd Transparent Smart Motor Robot Car Battery Box Chassis Kit For Arduino
Raspberry Pi Bumper for Raspberry Pi 5 Shock-Absorbing Case for Pi 5 Protective Bumper Case for Pi 5 Raspberry Pi 5 Bumper Case
Raspberry Pi Compute Module 4 - CM4001008 - 1GB RAM 8GB eMMC No Wireless
12x18cm Double Sided PCB Board Universal Soldering PCB Board Tinned Through Holes Universal Printed Circuit Proto Board 2.54mm
Royal Blue PLA PRO+
USB Mini Discharge Load Resistor 2A/1A USB Mini Discharge Load USB Mini Discharge Load Resistor 2A/1A With Switch 1A Green led, 2A Red led Integrated Circuits
ULN2003 Stepper Motor Driver ULN2003A Driver Module Stepper Motor Driver Board
Radiolink Pixhawk Flight Controller Board with Power Module, Safety Switch, Three-Wire Servo Cable, Micro-SD Card, Buzzer
JX Servo PS-1181HB 17g Plastic Gear For RC Model, Helicopter Parts Core Motor For RC Helicopter Car Boat Airplane
UW 01 Washing/Curing Machine
Waveshare 2inch LCD Display Module for Raspberry Pi Pico, 65K Colors, 320×240, SPI
Flysky FS-i6S 2.4GHz 10CH AFHDS 2A RC Transmitter With FS-iA10B 10CH Receiver
Radiolink Divit Digital Video Transmission Adapter Board for DJI DIGITAL FPV SYSTEM, DJI O3 Air Unit, Caddx Walksnail Avatar HD System, compatible with Mini Pix, Crossflight, PIXHAWK
GT2 Timing Belt 10M GT2 Width 6mm Black Open Timing Belt For 3D Printer
Waveshare 2.8inch Resistive Touch LCD, 320x240, Raspberry Pi/Arduino
8-Pin 8pins DIL DIP IC Socket PCB Mount Connector
Raspberry Pi Compute Module 4 - CM4002008 - 2GB RAM 8GB eMMC No Wireless
Reviews
There are no reviews yet.