Description
Description:
Radiolink CM210 LiPo Battery Balance Charger has a software logic safety algorithm, when the battery with a circuit error, the charger will stop charging. Over-temperature protection automatically reduces the charging current when the battery PCB board temperature is too high.
Radiolink CM210 LiPo Battery Balance Charger maximum output power of 20W and supports 1.5A fast charging mode. With trickle current recovery of over-discharged batteries and extended battery life, CM210 can minimize the risk of a battery explosion.
Specifications:
- Input Voltage: 5v
- Compatible Battery: 2s lipo Battery
- Charging Accuracy: 0.02v
- Recharging Current: 1.5a
- Balance Current: 0.8a
- Maximum Power Output: 20w
- Charger Connector Type: USB Type-C
- Working Mode: Fast charging, Balance charging, Repair mode
- Size: 40.5*21*15mm
- Weight: 9g
Features:
- Small Size:Â Only 40.5*21*15mm; 9g, compact and portable, you can take it anywhere.
- Charging Indicator:Â Radiolink CM210 LiPo Battery Balance Charger will remind you with an indicator that the battery is full, while factory chargers can only be judged by your own experience.
Package Included:
- 1 x Radiolink CM210 LiPo Battery Balance Charger
- 1 x Type C Charging Cable






SG90 Servo Motor 9g Mini/Micro Servo Motor 180 Degrees
USB to Micro USB Cable USB A Type to Micro USB B Type 1M Cable (Colour May Vary)
MG945 Servo Motor 180 Degree 12Kg Precision Servo With Wide Rotation Range And High-Torque Servo For RC Applications
5010 750KV Brushless Motor 5010 750KV High Torque Brushless Motor for Drone
Radiolink R6FG RC Receiver R6FG 6 Channels 2.4GHz RC Receiver with Gyro, Surface Long Range Control RX for Vehicle Drifting/Crawler/Truck/Boat Works with Radio Controller RC4GS V3/RC6GS V3/RC4GS V2/RC6GS V2/T8FB/T8S
12x8cm Double-Sided PCB Double Side Copper Prototype Universal PCB Prototype Board
PRO Mini Atmega328 Development Board 5V/16MHz compatible with arduino IDE
10.1" LCD Display IPS LCD Screen 1280×800 With Driver Board Kit Raspberry Pi Compatible With and All Version of Pi
DC Barrel Power Jack/Connector
Raspberry Pi 4 TFT 3.5 inch Touch Screen with Case, 480x320 Resolution 60fps Monitor LCD Display
Raspberry Pi Telephoto Lens 16mm RPi Telephoto Lens High-Quality 16mm Telephoto Lens Zoom In On The Details With A 16mm Telephoto Lens
2 Pin Male JST Connector 2 Pin Battery Connector for JST RCY Plug Male Connectors Wire for RC Toys Battery
Generic Micro Endstop Switch Micro Switch Mechanical End Stop AC 250V 5A SPDT Miniature NO/NC Switch For Reprap 3D Printer/CNC/DIY
Raspberry Pi SSD Kit 256GB NVMe SSD Kit IOPS3 40k NVMe Boot Drive for Raspberry Pi 5
Crystal Emerald Green PLA PRO+
2000mAh Rechargeable Battery 18650 2000mAh Cell 18650 Li-ion Battery 2000mAh 18650 Battery 18650 Rechargeable Cell High-Capacity 18650 Li-ion Rechargeable Battery 18650
20×4 LCD Display 20×4 Character LCD Display with Yellow Backlight - Alphanumeric
Radiolink Pixhawk Flight Controller Board with Power Module, Safety Switch, Three-Wire Servo Cable, Micro-SD Card, Buzzer
Bambu Lab X1E 3D Printer Combo
100k ohm Rotatry Potentiometer 3 Terminals Rotary Shaft Potentiometer Variable Resistor Linear Taper Rotary Potentiometer Pots
Reviews
There are no reviews yet.