Description
Description:
The NE555 Timer IC is a highly stable device for generating accurate time delays or oscillation. Additional terminals are provided for triggering or resetting if desired. In the time delay mode of operation, the time is precisely controlled by one external resistor and capacitor. For astable operation as an oscillator, the free running frequency and duty cycle are accurately controlled with two external resistors and one capacitor. The NE555 Timer IC may be triggered and reset on falling waveforms, and the output circuit can source or sink up to 200mA or drive TTL circuits.
Specifications:
- Package/Case: DIP-8
- Minimum Supply Voltage: 4.5V
- Maximum Supply Voltage: 16V
- Product Series: NE555
- No. of Timers/Counters: 1
- Operating Temperature Range: 0 ~ 70°C
Features:
- Timing from microseconds through hours
- NE555 Timer IC operates in both astable and monostable modes
- NE555 Timer IC has adjustable duty cycle
- Output can source or sink 200 mA
- Output and supply TTL compatible
- NE555 Timer IC has normally on and normally off output
- NE555 Timer IC is available in 8-pin MSOP package
Pin Description:
| Pin | Name | Purpose |
| 1 | GND | Ground reference voltage, low level (0 V) |
| 2 | TRIG | The OUT pin goes high and a timing interval starts when this input falls below 1/2 of CTRL voltage (which is typically 1/3 Vcc, CTRL being 2/3 Vcc by default if CTRL is left open). In other words, OUT is high as long as the trigger low. The output of the timer totally depends upon the amplitude of the external trigger voltage applied to this pin. |
| 3 | OUT | This output is driven to approximately 1.7 V below +Vcc, or to GND. |
| 4 | RESET | A timing interval may be reset by driving this input to GND, but the timing does not begin again until RESET rises above approximately 0.7 volts. Overrides TRIG which overrides threshold. |
| 5 | CTRL | Provides “control” access to the internal voltage divider (by default, 2/3 Vcc). |
| 6 | THR | The timing (OUT high) interval ends when the voltage at threshold is greater than that at CTRL (2/3 Vcc if CTRL is open). |
| 7 | DIS | Open collector output which may discharge a capacitor between intervals. In phase with output. |
| 8 | VCC | Positive supply voltage, which is usually between 3 and 15 V depending on the variation. |
Package Included:
1 x NE555 Timer IC 555 DIP-8 General Purpose Single Bipolar Timer IC
Waveshare 7" Resistive Touchscreen LCD 1024×600 Multi-Purpose Touch Display With HDMI, IPS Compatible With Raspberry PI & Various Systems 
Radiolink PRM-03 Telemetry Module PRM-03 Real-time OSD Information Telemetry Module GPS/RSSI/Voltage (1S-12S)/Distance and More on RC Transmitter AT9/AT9S/AT9S Pro/AT10II, Works with crossflight/Minipix/PIXHAWK, APM FC 
DM002 DIY Drone Kit DM002 2.4GHz RC Quadcopter DM002 Remote Control Quadcopter Drone Best Ideal Gift For Beginners ( Camera Included) 
Flysky FS-i6S 2.4GHz 10CH AFHDS 2A RC Transmitter With FS-iA10B 10CH Receiver 
2x18650 Battery Holder Black Plastic Storage Box Case Holder For Battery 2 x 18650 Cell Box, Without Cover 
4-Pin 250V 12V Rocker Switch Illuminated Rocker Switch Waterproof Rocker Switch With 30A Current Rating And UL Certification For Car Truck Boat Motorhome - Yellow 
Creality 3D Halot R6 Resin 3D Printer 
Universal Heat Sink 25x25x10mm Universal Aluminum Heat Sink - Silver 
Ender-3 V3 Plus 3D Printer 
Electric Wire Push Type Lock CH-2 Way Quick Push Type Lock Electric Wire Connectors Terminal Cable Lock Push Connector Terminals 
Raspberry Pi Compute Module 4 - CM4001008 - 1GB RAM 8GB eMMC No Wireless 
930KV Brushless Motor A2212 930KV BLDC Brushless Motor A2212 For Aircraft F450 Quadcopter Helicopter 
Pro Micro Atmega32U4 Development Board 5V 16M Mini Development Board Pro Micro 5V 16M Mini Leonardo Microcontroller Development 
8-Pin 8pins DIL DIP IC Socket PCB Mount Connector
Reviews
There are no reviews yet.