Description
Description:
The NE555 Timer IC is a highly stable device for generating accurate time delays or oscillation. Additional terminals are provided for triggering or resetting if desired. In the time delay mode of operation, the time is precisely controlled by one external resistor and capacitor. For astable operation as an oscillator, the free running frequency and duty cycle are accurately controlled with two external resistors and one capacitor. The NE555 Timer IC may be triggered and reset on falling waveforms, and the output circuit can source or sink up to 200mA or drive TTL circuits.
Specifications:
- Package/Case: DIP-8
- Minimum Supply Voltage: 4.5V
- Maximum Supply Voltage: 16V
- Product Series: NE555
- No. of Timers/Counters: 1
- Operating Temperature Range: 0 ~ 70°C
Features:
- Timing from microseconds through hours
- NE555 Timer IC operates in both astable and monostable modes
- NE555 Timer IC has adjustable duty cycle
- Output can source or sink 200 mA
- Output and supply TTL compatible
- NE555 Timer IC has normally on and normally off output
- NE555 Timer IC is available in 8-pin MSOP package
Pin Description:
| Pin | Name | Purpose |
| 1 | GND | Ground reference voltage, low level (0 V) |
| 2 | TRIG | The OUT pin goes high and a timing interval starts when this input falls below 1/2 of CTRL voltage (which is typically 1/3 Vcc, CTRL being 2/3 Vcc by default if CTRL is left open). In other words, OUT is high as long as the trigger low. The output of the timer totally depends upon the amplitude of the external trigger voltage applied to this pin. |
| 3 | OUT | This output is driven to approximately 1.7 V below +Vcc, or to GND. |
| 4 | RESET | A timing interval may be reset by driving this input to GND, but the timing does not begin again until RESET rises above approximately 0.7 volts. Overrides TRIG which overrides threshold. |
| 5 | CTRL | Provides “control” access to the internal voltage divider (by default, 2/3 Vcc). |
| 6 | THR | The timing (OUT high) interval ends when the voltage at threshold is greater than that at CTRL (2/3 Vcc if CTRL is open). |
| 7 | DIS | Open collector output which may discharge a capacitor between intervals. In phase with output. |
| 8 | VCC | Positive supply voltage, which is usually between 3 and 15 V depending on the variation. |
Package Included:
1 x NE555 Timer IC 555 DIP-8 General Purpose Single Bipolar Timer IC





M8N GPS Compass Module GPS Module With Built-in Electronic Compass High Precision M8N GPS and Electronic Compass Module For Accurate Positioning and Navigation
Waveshare 7inch Capacitive Touch Display for Raspberry Pi, DSI Interface, 800×480 Compatible with Raspberry Pi 5/4B/3B+/3A+/3B/2B/B+/A+/CM3/3+/4
RDS3115MG 15KG Standard Servo Kit RDS3115 360° Continuous Rotation Servo Kit For Robotics and Automation
18650 Battery Spacer Holder 3 x 6 18650 Battery Spacer Holder with 18.5mm Bore Diameter
16x2 I2C LCD IIC/I2C 1602 LCD Module Yellow Backlight
APM Power Module(5.3V/3A) With XT60 Connector Best for ARDUPILOT APM Pixhawk PX4 Naze32 Controller
100RPM DC BO Motor singal Shaft Smart Car Robot Gear Motor
10x15mm Cable Drag Chain 10 x 15mm 1m Cable Drag Chain Wire Carrier
MG996R Servo Motor MG996R Metal Gear Servo Motor - 180 Degree
Power Supply Regulator UBEC-5V/5A External Switching Power Supply Regulator
Radiolink PRM-03 Telemetry Module PRM-03 Real-time OSD Information Telemetry Module GPS/RSSI/Voltage (1S-12S)/Distance and More on RC Transmitter AT9/AT9S/AT9S Pro/AT10II, Works with crossflight/Minipix/PIXHAWK, APM FC
2.4 Inch TFT LCD Display RGB 240x320 Resolution SPI interface Color LCD Serial Port Module Touchless Panel Module For Arduino And Raspberry Pi
AD16-22TM(AD101-22TM) Temperature Indicator 22mm Round LED Temperature Indicator Light -20 to 199℃
AD16-16C LED Pilot Light AC220V 16mm LED Power Pilot Light AC220V Panel Mount LED Indicator Light Compact and Durable Power Pilot Light - White
12V 200 RPM Geared Motor Johnson DC Gearbox Motor High-Torque 200 RPM Geared Motor High-Performance 100 RPM DC Geared Motor
Waveshare 4 inch LCD 10.16cm RPi LCD (A) 480x320 Raspberry Pi Display
Single 18650 Battery Holder With Wire Leads and Spring Contacts 3.7v Battery Case Reliable 18650 Battery Holder For Your Projects
A4988 Stepper Motor Driver 3D Printer Reprap Stepper Driver A4988 Motor Driver Module With Heat Sinks For Arduino And Raspberry Pi
33GB-520 12V DC Gear Motor Speed Control Gear Motor High Torque 170-350RPM Gearbox Motor With Adjustable Speed Control For Industrial Applications
Bambu Lab TPU 95A HF 1.75mm 3D Filament Grey
No Touch Stainless Steel Door Exit Switch/Touch Free Exit Push Release Button Switch for Electric Access Control
Raspberry Pi OV5647 Camera 5MP 1080P IR-Cut Camera Module for Raspberry Pi 3/4 Raspberry Pi Camera Module with Manual Day/Night Mode High-Resolution IR-Cut Camera for Raspberry Pi Projects
1200mAh 18650 Battery 3.7V 18650 Rechargeable Battery Li-ion Battery
Electric Wire Push Type Lock CH-2 Way Quick Push Type Lock Electric Wire Connectors Terminal Cable Lock Push Connector Terminals
12V 100RPM Gear Motor Centre Shaft DC Geared Motor Heavy Duty Motor
BMS Board 1S 3.7V 2.5A Lithium Battery Protection Board Polymer BMS PCM PCB Over Charge Discharge Li-ion Protect Module
37 in 1 Sensor Kit Compatible with Arduino UNO, NodeMcu, Raspberry Pi, Robotics Projects
4S 15A BMS Board 4S 15A 18650 Lithium Battery Protection Board BMS Module
JX Servo PS-1181HB 17g Plastic Gear For RC Model, Helicopter Parts Core Motor For RC Helicopter Car Boat Airplane
32 Channel Robot Servo Control Board Servo Motor Controller PS2 Wireless Control USB/UART Connection Mode Versatile Servo Controller For Robotics And Automation Projects
15A Test Lead Wire 4mm Banana Plug And Alligator/Crocodile Clip 15A Multimeter DIY Test Wires With Secure Connections - Blue
2x18650 Battery Holder Black Plastic Storage Box Case Holder For Battery 2 x 18650 Cell Box, Without Cover
Official Raspberry Pi Zero Case Compatible with Raspberry Pi Zero, Zero W, Zero 2W
7S 20A BMS Board 7S 20A Lithium Li-ion LiFePO4 Battery BMS Protection Board with Balancing for Battery Protection Board
Y Type Servo Extension Wire 1JR Male To 2 Futaba Female Y Type Servo Extension Wire - 30cm
10K OHM Rotary Potentiometer Audio Taper Log Pot 10K Solder Lugs Split Shaft Linear Rotary Potentiometer
40A 2-4S Brushless ESC Electronic Speed Controller With High-Performance 40A ESC 2-4S LiPo Batteries and Powerful 40A ESC Wide Voltage Compatibility For RC FPV Quadcopter Aircraft
MG945 Servo Motor 180 Degree 12Kg Precision Servo With Wide Rotation Range And High-Torque Servo For RC Applications
GT2 Timing Belt 10M GT2 Width 6mm Black Open Timing Belt For 3D Printer
Reviews
There are no reviews yet.