Description
Description:
The Crowbits-Colour Sensor Module can recognize the color of the surface of the object.
Specifications:
- Interface Type: I2C
- Operating Voltage: 3.3V DC
How does it work?
The colour sensor is also called a color recognition sensor. It covers the corrected red, green, and blue filters on an independent photodiode, and then processes the output signal accordingly to identify the color signal. The color sensor has high reliability in detecting similar colors and tones. It achieves color detection by measuring the reflection ratio of the three primary colors that make up the color of the object.
Due to the extremely high precision of this color detection method, the sensor can accurately distinguish extremely similar colors, even different tones of the same color. Generally, the sensor has three light sources red, green, and blue. Three kinds of light are emitted by the same lens to be a target object reflected. The amount of light reflected or absorbed depends on the color of the object.
Bring the color object to be tested close to the sensor, illuminate the measured object with the lamp, and then reflect it to the sensor. After the sensor is identified and calculated, the value corresponding to the current color is output. Since the wavelength emitted by different colors is different, so different colors come back to the sensor after light, you will get different values. According to the feedback value, the specific color will be known after the operation.

How to use it?
The colour sensor module is connected to the main board downloads the detection program of the color sensor and outputs the result when the color is detected. It can also be used with the output display module to show the results on the display module.
Useful Link:
Package Included:
1 x ELECROW Crowbits-Colour Sensor Module RGB Colour Sensor Module Colour Detector Sensor Bring Colour To Your Robotics And IoT Projects









Waveshare 2" IPS LCD Display Module 240x320 SPI Interface LCD Display Module
5x6 18650 Battery Spacer Holder With 18.5mm Bore Battery Holder Lithium-ion Battery Holder Rechargeable Battery Holder Plastic Holder For DIY Battery Pack
5MM Blue Led Light Emitting Diode (Pack of 5)
CD4504 IC Hex Voltage Level Shifter IC DIP-16 Package
2x18650 Battery Holder 18650 x 2 Battery Holder with Cover and On/Off Switch With Open End Wires
3S 12V BMS Board 3S 12V 18650 Lithium Battery Protection Board 11.1V 12.6V overcharge over-discharge protect 8A 3 Cell Pack Li-ion BMS PCM PCB
TowerPro MG958 Servo Motor Digital High Torque Metal Gear Motor
3S 11.1V BMS Board 3S 11.1V 10A 18650 Lithium Battery Overcharge And Over-current Protection board-Good Quality
86HS68-5904-08J NEMA34 Stepper Motor 34 kgcm Holding Torque Stepper Motor for High-Torque and Heavy-Load Applications
40 Pin 0.1 Inch (2.54mm) Straight Single Row Male Pin Header Connector
2x18650 Battery Holder Black Plastic Storage Box Case Holder For Battery 2 x 18650 Cell Box, Without Cover
5MP Raspberry Pi Camera 1080p Adjustable Focus Camera OV5647 Focus Camera Raspberry Pi Camera Module Raspberry Pi 3/2 Model B/B+
XT60 Connector Plug XT60 Series Adaptor Connection Plug
12V 300RPM Gear Motor Centre Shaft DC Geared Motor Heavy Duty Motor for Robotics
GT2 Timing Belt 10M GT2 Width 6mm Black Open Timing Belt For 3D Printer
Aluminum Heatsink for A4988 DRV8825 Stepper Motor Driver - 5 Pieces Pack
Nano Expansion Shield Nano 328P Expansion Adapter Breakout Board IO Shield
Reviews
There are no reviews yet.