Description
Description:
The Crowbits-Colour Sensor Module can recognize the color of the surface of the object.
Specifications:
- Interface Type: I2C
- Operating Voltage: 3.3V DC
How does it work?
The colour sensor is also called a color recognition sensor. It covers the corrected red, green, and blue filters on an independent photodiode, and then processes the output signal accordingly to identify the color signal. The color sensor has high reliability in detecting similar colors and tones. It achieves color detection by measuring the reflection ratio of the three primary colors that make up the color of the object.
Due to the extremely high precision of this color detection method, the sensor can accurately distinguish extremely similar colors, even different tones of the same color. Generally, the sensor has three light sources red, green, and blue. Three kinds of light are emitted by the same lens to be a target object reflected. The amount of light reflected or absorbed depends on the color of the object.
Bring the color object to be tested close to the sensor, illuminate the measured object with the lamp, and then reflect it to the sensor. After the sensor is identified and calculated, the value corresponding to the current color is output. Since the wavelength emitted by different colors is different, so different colors come back to the sensor after light, you will get different values. According to the feedback value, the specific color will be known after the operation.

How to use it?
The colour sensor module is connected to the main board downloads the detection program of the color sensor and outputs the result when the color is detected. It can also be used with the output display module to show the results on the display module.
Useful Link:
Package Included:
1 x ELECROW Crowbits-Colour Sensor Module RGB Colour Sensor Module Colour Detector Sensor Bring Colour To Your Robotics And IoT Projects







mm RGB LED Common Anode 4-Pin Tri-Color Emitting Diodes F5 - Frosted
EMAX D-SHOT Bullet 6A ESC Bullet Series 6A BLHeli-S Dshot ESC For Onshot42 2S FPV Racing Drone Built-in Programmable RGB LED For RC FPV Drone Quadcopter
T0-92 Power Transistor assortment Kit NPN PNP Kit Set Three Pins 15 Values 300PCS (20pcs each) with Clear Plastic
Radiolink M8N TS100 GPS Module Compass Module High Positioning Accuracy for Flight Controller DIY RC Drone FPV
Fluo Popsicle Yellow PLA PRO+
Readytosky 80A 2-6S Brushless ESC 2-6S Brushless Electronic Speed Controller (ESC) High Power 80A ESC For FPV Racing Drones and Quadcopters
5010 750KV Brushless Motor 5010 750KV High Torque Brushless Motor for Drone
MG996R Servo Motor MG996R Metal Gear Servo Motor - 180 Degree
FlySky Data Line Cable Access Wiring Connector for T6 i6, FS-i6, FS-T6 Transmitter
Nextion NX3224T028 2.8" Basic HMI Touch Display 2.8inch HMI Display Basic Series HMI Touchscreen Display 2.8inch Touch Display
3.5mm Terminal Connector 3.5mm Pitch 2 pin 2 way Straight Pin PCB Screw Terminal Block Connector
Radiolink F121 Flight Controller Board F121 Mini Four-axis FPV Drone DIY Entry-level Self-stable Flight Control Motherboard Image Transmission
Reviews
There are no reviews yet.