Description
Description:
A 9V to Barrel Jack Adapter is an adapter which transfers the 9 volts from a battery to a DC power plug- which then can be plugged in and power a DC power barrel jack with 9 volts. To use this device, a user just connects a standard 9-volt battery to the 9-volt battery holder slot of the adapter. When inserted correctly, the battery’s voltage will be transferred to the DC power plug. The 9V Battery Snap Connector with Power Plug provides the ability to conveniently use a 9V battery to power many common boards and modules such as the popular Arduino and compatible microcontrollers. This plug is a very common barrel type with an outside diameter of 5.5mm and an inside diameter of 2.1mm. The center is positive.
Specification:
- Supply Voltage: 9V
- DC jack Size: 2.1mm
Features :
- Excellent material
- fine workmanship
- It is an environmental 9V battery buckle
- T- fonts, with red and black connecting lines
- The Cable Length: Approx. 12cm
- Save power and protect the environment
- Good electrical conductivity and comfortable sense of touch
Application:
- This DC power plug can then be plugged into any DC power barrel jack (of equivalent size). The DC power barrel will then supply 9 volts to the circuit to which it is connected.
- This is very handy for any type of circuit where you want to supply 9 volts to the circuit and you want it to operate on battery power, or if you just don’t have a standard 9-volt power adapter.
- This setup with a 9V to Barrel Jack Adapter can be used to power your own custom-made circuit in which you power it with a DC plug plugged into the DC barrel, or it can be used to power boards with DC power barrel jacks installed into them. Many boards have DC barrels, including Arduino boards, parallax boards, and many others
Package Included:
1 x DC 9V Battery Snapper Connector With DC Jack
Raspberry Pi Pico W Development Board with Raspberry Pi RP2040 Chip, Built-in WiFi Support 2.4/5 GHZ Wi-Fi 4 
10K Ohm Resistor, 10K Ohm Resistance 1/4W Power Rating 5% 
Waveshare 1.8inch LCD Display Module For Raspberry Pi Pico 65K RGB Colors 160×128 Pixels TFT Screen SPI Interface 
Raspberry Pi Zero WH Pi Zero WH Wireless Raspberry Pi 0 WH Built-In WiFi And Bluetooth Pre-soldered GPIO Headers 
Raspberry Pi 5 Single Board Computer with 2.4GHz quad-core, 64-bit Arm Cortex-A76, and LPDDR4X-4267 SDRAM 4GB 
18*30cm Universal PCB Prototype Board 18*30 cm Universal PCB Prototype Board Single-Sided 2.54mm Hole Good For DIY Soldering Electronic Projects Green Thickness 
Bambu Lab PETG-CF 3D Printer Filament 1.75mm Malachite Green
Reviews
There are no reviews yet.