Description
Description:
The L78M05CV is a fixed output, three terminal precision positive voltage regulator in 3 pins TO-220 package. This regulator can provide local on-card regulation by eliminating distribution problems associated with single point regulation. The L78M05CV fixed voltage regulator is designed with thermal overload protection that shuts down the circuit when subjected to an excessive power overload condition, internal short circuit protection that limits maximum current the circuit will pass and output transistor safe area compensation that reduces the output short circuit as the voltage across the pass transistor is increased. If adequate heat sinking is provided then this positive voltage regulator can deliver over 0.5A output current.
Specification:
| Product Series | L78M |
| No. of Output | 1 |
| Output Type | Fixed |
| Polarity | Positive |
| Input Voltage Range | 7V to 35V |
| Output Voltage | 5 V |
| Output Current | 500 mA |
| Operating Temperature Range | 0°C to 125°C |
| Load Regulation | 100 mV |
| Line Regulation | 100 mV |
Features:
- Fixed output voltage is 5V
- Output current is 0.5A
- Dropout voltage is 2V
- Maximum DC input voltage is 35V
- Output transition SOA protection
- Output voltage tolerance is 4%
- Operating temperature range 0°C to 125°C
- Applications: Power Management.
Pin Description:
| Pin No. | Pin | Function | Description |
| 1 | INPUT | Input voltage (7V-35V) | In this pin of the IC positive unregulated voltage is given in regulation. |
| 2 | GROUND | Ground (0V) | In this pin where the ground is given. This pin is neutral for equally the input and output. |
| 3 | OUTPUT | Regulated output; 5V (4.8V-5.2V) | The output of the regulated 5V volt is taken out at this pin of the IC regulator. |
Datasheet:
Package Included:
1 x Voltage Regulator 7805
Waveshare 3.5inch Resistive Touch Screen LCD, 480×320, HDMI, IPS, Various Devices & Systems Support 
1.8 inch LCD Display Module ST7735 Driver TFT 128x160 4 IO LCD Display Arduino Compatible LCD Microcontroller Compatible LCD 
N20 Gear Motor 6V 400RPM Micro Gear Motor 3mm Shaft High-Torque Gear Motor N20 Micro Metal Gear Motor Powerful N20 Micro Gear Motor for Small Devices 
A4988 Stepper Motor Driver 3D Printer Reprap Stepper Driver A4988 Motor Driver Module With Heat Sinks For Arduino And Raspberry Pi 
Official Raspberry Pi 5 Case Red and White Raspberry Pi 5 ABS Case Raspberry Pi 5 Active Cooling PWM Fan Protection 
Waveshare 10.1inch Capacitive Touch Screen (B) LCD With Case 10.1" Touchscreen LCD IPS Touchscreen With HDMI Input High-Resolution, Low-Power Touchscreen 
N20 Micro Gear Motor N20 12V 200 RPM Micro Metal Gear Motor With Encoder 
XT60 Connector Plug XT60 Series Adaptor Connection Plug 
16 Pin DIP IC Socket-Base-Connector suited for Microcontrollers & IC's 
1400KV BLDC Motor A2212 10T 1400KV Brushless Motor for Drone 
Tactile Switch Small Mini Micro Tactile Push Button 
4S 15A BMS Board 4S 15A 18650 Lithium Battery Protection Board BMS Module 
10K OHM Rotary Potentiometer Audio Taper Log Pot 10K Solder Lugs Split Shaft Linear Rotary Potentiometer 
30 Type Assorted Resistor Kit 600 pcs 
GY-6A 12V 24V 36V 48V Lead Acid Battery 2-15S Lithium Battery Capacity Tester Indicator Digital Voltmeter 
3x18650 Battery Holder Black Plastic Storage Box Case Holder For Battery 3 x 18650 Cell Box, Without Cover 
3S 12V BMS Board 3S 12V 18650 Lithium Battery Protection Board 11.1V 12.6V overcharge over-discharge protect 8A 3 Cell Pack Li-ion BMS PCM PCB 
MG996R Servo Motor MG996R Metal Gear Servo Motor - 180 Degree 
Nichicon GU 3300uF 80V Capacitor 25x45mm Snap-in PSU Capacitor High Voltage Electrolytic Capacitor For Power Supplies
Reviews
There are no reviews yet.